Search results

This is a 12A

It has auto shutdown short protection on each output but I'm not sure of the threshold that constitutes a short. Sometimes those higher current requirements for digital stuff are just startup spikes and sometimes it's just for one component, like the screen which will glitch but everything else...

Thanks. Reversing the LEDs made them light up. I guess the square negative pad threw me. I think I have some other issues also. One LED is inconstantly flickering and other is always on no matter the trim pot or switch settings. I'll try and reflow some spots.

My flat side is facing away from the top jacks. That's gotta be it then. I'll pull the LEDs and reverse them. Thanks

I went ahead and tried it. No smoke so that's good. The output voltages are a little lower than the TC1044 but it seems ok I guess

All voltages look good but neither of the yellow LEDs are lit. All trimpots set at noon. All the TL072 came from Mouser. Signal is passed in bypass and effect. A weird thing I noticed when putting it together was the led negative pad was square rather than the positive but they are marked with A...

I'm building the DuoPhase and I think one of my TC1044SCPA is DOA from Tayda. I'm getting odd voltages on pin 5. Like a dummy, I only ordered 2 so trying to troubleshoot with what I have on hand, which is a TC7662BCPA like the VFE pedals use. It looks to be pin compatible. Anybody know if it...

This is what I do if I actually need to run a pedal off of a battery.

The Peterson's are two pieces of bent sheet metal. You could probably create one somewhere like SendCutSend. https://sendcutsend.com/

That's Moore's law right 😁

I don't even bother with the adapters.

Chuck, The FX53 values for R8 and C10 in the tone circuit put the filter around 234Hz and you raised yours to around 482Hz. The other 3 variants fx50,52,55 have it at 2.2kHz. Does the higher cutoff affect the circuit in any significant way other than just brightening it up a bit?

I ordered two days ago and got it today. UPS Express for $6 which was the cheapest offered to me for about $100 worth of random stuff, mainly pots and switches. No enclosures tho

I just ordered parts for my ppcb FX5x board last night. I'm gonna add a couple of switches and try to make it an all in one. I'll definitely be interested to see what you come up with.

I tore into one and the others that use the same board a couple years ago and made some notes https://www.madbeanpedals.com/forum/index.php?topic=32722.0

I just drilled mine a couple of days ago. It's a bunch of small holes and a file. A faceplate is the way to go.

Fart pedal, hear we come!

PhaSer, PhaSer, PhaSer...

I have an AC30CC and decided to try the Joyo AC Tone into various PA and other small amps and I could never get it to sound convincing at all. The ACTone is supposedly a dead-on knock off of the Tech21 Liverpool. The Vox sound is mostly in the power amp. Top boost is just a little eq on a...

Ive had these for a few years and they work fairly well for my purposes. I needed the smaller size and these are not as wide as some of the others. Also, that Engineer brand stuff is high quality. IWISS Mini Micro Open Barrel Crimping Tool https://www.amazon.com/dp/B078WNZ9FW