Search results

Just wanted to say that @MichaelW sent me one of these boards and it is a fantastic delay.

Nice to see you sprung for some decent knobs! :)

The article is a little vague on this but there is one sentence towards the end that applies here. “A phaser needs JFETs that are all in the resistive range - not fully on or fully off- at the same time.” So it may be minimal and i don't have the data sheet in front of me for the 5952 but if...

Here you go. This is based off the build doc template. Leds are 3mm no bezel and the power is the lumberg style. https://drill.taydakits.com/box-designs/new?public_key=ajNZMjVRSVNFeU1RSzNMQjNONGptZz09Cg==

As per my norm give it a few days to see if any one shows up with it. If not I will whip one up for you.

Not saying you shouldn’t wait, you absolutely should. Those fv-1 are tricky if you’re not used to smd. That being said learning how to solder smd should be on your to do list. With a lot of transistors getting harder to find in through hole form smd is inevitable. I recommend you search for a...

Okay this should get you in the ballpark. This is “not verified” yet. I would check the measurements against your board to be certain with everything being board mounted. You may want to make the holes a little larger or ream them for wiggle room. This is based solely on the build doc...

Give me a few days and i will get one up. I do have the board and will confirm with measurements since the jacks are board mounted.

Here it is adjusted from that. I did measure to confirm. Adjust the led to taste. https://drill.taydakits.com/box-designs/new?public_key=RHZiRG9iMUduNEx0VmZoV3JFRnU2UT09Cg==

Anyone else ever put this together besides @MichaelW and I? Both of us came out with a working effect with no issues. I am curious to see what experiences others had with it. If it works we should let Kevin know so he can add it to his offerings.

Here you go. Measured off the template. So you might want to do a quick measure on your board just to make sure. 28mm between the pots on each line then 26mm below the top line. ( hope that makes sense) The power jack is the lumberg style and leds are 3mm no lens...

Give it a few more days. If someone doesn't have it i will get one up.

Got a birdbuddy for Christmas

I am going to bookmark that course and come back to it. I am happy to know a good one exists. It’s kinda tough to learn KiCad on your own. It can be done as we are examples but I just feel like it some things should and could be easier to do. That’s what I was looking for in a course. Not so...

Got a pic of the underside of the board? Could be a missed joint somewhere. I have missed a pad on an ic more than once, lol.

I would expect it to pull 400-450ma. I haven’t built that particular project but the other c2c single tube pedals I have are in that range give or take. The power supply is usually the culprit when it comes to the tube pedals. The bassman pulls probably 600ish so you should be well within range...

You can. It will import the libraries for that particular project. You select import from non Kicad in the drop down menu and find your eagle files. It’s pretty easy to do.

So at best I would say this is an extremely basic overview, and even at that it’s missing stuff. It needs some work. I just sent a polite email about requesting a refund and they did it within a few days. If possible leave feedback so they can work to make it better.

I still have 7.7 as a backup but made the switch to KiCad. Its different at first but I love it now and find myself trying to use KiCad shortcuts in Eagle, lol. Do yourself a favor and get the sheepylove KiCad library as well. If you learned how to use Eagle well learning KiCad wont be that...

Good to know on the libraries. I made it 54% through the course so I never made it there. It seems like they should be towards the beginning since you are using them right away. Once again with some editing and improvements maybe they can move stuff around to improve the overall course. It’s...