Search results

Great work! I've been hunting some JST XH cable assemblies like Aion uses in their kits to make the daughter board connection less of a headache. The only ones I can find are 10cm and longer which is more length than required. I wish Aion would sell the 70mm 3pin assemblies as a component item.

Great job! Thanks for the pro-tip about joining the boards first, then soldering both sides for clearance check/test!

I used to use OrCAD to do work related schematics and PCBs in the early 2000's and I attempted Eagle once and stopped within minutes. Not happening for me...

If you can get the calligraphy in a digital format (preferably a vector graphic format like SVG), it makes it easy to work with for Affinity Designer 2 or other programs that can generate the PDF necessary for Tayda. My guess is that an iPad or similar with a drawing device could be a solution...

Thanks for the complements on the graphic. I agree on the great resources here and they helped me a ton! I'm using Affinity Designer 2 and a lot of my graphics are Etsy SVG files or similar ways to get started without much 'designing'. The Aurum posted here was artwork created by my wife who...

3266W will work in the existing footprint as a 12-turn trimmer. I used that for a recent XC Phase build. https://www.bourns.com/data/global/pdfs/3266.pdf

Quick update - this one was built and verified as a fit to the PCB.

Quick update - this one was built and verified as a fit to the PCB.

Quick update - this one was built and verified as a fit to the PCB.

Quick update - this one was built and verified as a fit to the PCB.

Very creative artwork. Looks great!

I've had the same issue on quite a few.

Finished this build up recently and wanted to share some thoughts. I own a Protein 3.0 and have been able to compare back and forth with this build. The Protein green side has a noticeably softer attack in comparison to this PPCB build. On first listen, I perceived the attack difference as...

Looks great! Which germanium diodes did you use for D1 and D2?

https://drill.taydakits.com/box-designs/new?public_key=aEtsQUU2SGd1aHN4cW0yRGF2bEtBQT09Cg==

https://drill.taydakits.com/box-designs/new?public_key=K2tJUU5kdG9IUmdqZmxVUTRaUHMzZz09Cg==

This is for the newest version of ADHD at the time of posting. https://drill.taydakits.com/box-designs/new?public_key=RE13YmlQN0RZZ3pwSDNZdHVPSnlNQT09Cg==

https://drill.taydakits.com/box-designs/new?public_key=Y3FUNkFrNEE2cTlVRysrUysvM3FTZz09Cg==

https://drill.taydakits.com/box-designs/new?public_key=M3pYWkxmZUxzRUhVSEtwS25CdGNYUT09Cg==

This includes an alternate location for the LED to be mounted straight below (extended down from PCB solder side). There is likely a bit of error in that location and I'll report back if there are any edits after the finished build...