Search results

I just finished this one up today. Weird thing, is when I fired it up it sounded great already. I didn't touch one trimmer. Here is a little clip: https://photos.app.goo.gl/ECNRfRde3KWMxwem6

I have searched the forum but cannot find an answer. Has anyone successfully used a BC550Cinstead of a B? It seems the C has more gain. Also, has anyone tried using a flipped 2N3904 in place of the BC560? Thanks in advance!

Working on an Electrovibe Mini and I am completely out of the small 1uf caps. I see Mouser doesn't carry the ones I used in the past, but I found these Kemets. https://www.mouser.com/ProductDetail/KEMET/ESS105M050AB2AA?qs=gt1LBUVyoHk47Kt2aLnHUQ== I believe these are the same size, but can...

I have had these sitting around probably since they were released. I kind of went through a spell when I stopped building as much, but it seems I am back at it again. I love these pedals!

I think this is the second of these I have built, this is one of favorite fuzz pedals.

I think I have a few C1M DG laying around, I could use one of those instead. I just saw in the forums where another had used the B1M in place.

@Guardians of the analog not sure why this is funny, just asking a question?

Hey everyone, I’ve got all the ICs for this build, but I’m missing an A1M dual gang pot. I’ve got plenty of B1Ms — can I use one instead, or will that mess things up?

Performing some research on the forums I found that some have subbed the 2SK30 with a J201 and the LM258 and MCP602 with LM358s. Is this the general consensus?

Here is my second build of this pedal, I opted to include the expression jack, which I highly recommend. So without further ado, here's Smell The Magic. Here's a little demo. https://photos.app.goo.gl/EiyFX3TSL33twdh18

I have my signal generator setup with the positive and negative of the probe are going to their respective test hole on the mainboard. Then I have my multimeter measuring the voltage at pin 12 of IC10.

I ended up drilling it on my bench, but I used the template in the build guide which should be the same measurements.

Just finished this one up tonight. Crazy as I remember, need to play around to see what all it can do. What is the trimmer for? Kind of sounds like it increases and decreases the modulation? This Gorva enclosure is incandescent and changes colors based on the light angle.

Just finished up this project. It was a lot of fun to build, for some reason I love the projects with tons of components. This is the new DC version, I build the legacy version years ago. This thing rocks just like the legacy version. I was able to calibrate the compressor, per the build guide...

That FV-1 chip has some suspicious looking solder at some of the pads. I will try to clean it up, could possibly be legs shorting out together.

I have experienced some issues if you push it too hard into IC sockets. Those pins heat up and cause it to break down.

I love blue-tac, I have never had any issues with melting.

Thank you, I will have to check this out. I never really used Illustrator or any software suite like it, I guess that puts me at a huge disadvantage.

I have used Paint.NET for years, mainly because it is free. :) I have the Affinity Suite now and am wanting to learn how to use it. Firstly, can I take an image that I created in Paint.NET, import it into Affinity and export it so that it can be used by the UV service? The hardest thing so far...