Search results

Would you happen to have the artwork file to this, and would you mind sharing it with me?

He dun let the tone out!

That is a great idea on the jacks being lowered. This is the first time I have attempted to use the drill tool, I just wanted to see if I could get some extra eyes on it.

We need to see some pictures. Each side of the board and offboard wiring, without that there is no way to possibly offer any help.

Looking for some artwork for the L5 Preamp, I have a drill template if anyone needs one.

I don't use Reverb that much, but this is my go to, even though it may be cheating a bit. https://www.alexanderpedals.com/shop/space-force

Not sure if I am sharing this correctly or not, but just quickly put together a template for the new version of the L5 Preamp, just wanted to see if someone would check over this to see if it looks correct? https://drill.taydakits.com/box-designs/new?public_key=eUNVSkYyUldFU0s5SnM4alprOU1Hdz09Cg==

Clean and nice layout!

Yeah I checked the relays after putting in the new screen. Which made me go back and check my voltages and I figured they were a little low.

I went back and checked the voltages again, my power supply was only putting out 7.8 volts. Never had an issue before, changed it to my 9V 500mA power supply and it works now in true bypass and BB. Man I was pulling my hair out on this one.

Your chart is correct, I will have to test mon+BB mode. Let me try the new screen, but first I will try a factory reset.

I bought a new screen and it came with another harness. I desoldered the old harness and soldered back the new one and plugged it back into my old screen. I am able to tune when it is in buffered bypass, The tuner doesn't detect anything in true bypass. It does pass sound, however pushing the...

I use this one.

Sorry, yes it is not working in true bypass. I can hear the relay click over when I turn on buffered bypass. The other relay clicks on when I plug in the pedal.

Looks like the stray wire was touching so I cut it. One of the NE555 chips was not seated as great as it could be so I reseated it. My voltages match what is in the build docs. It will work as a tuner now in buffered mode, but not in true bypass mode?

Also, just to have all culprits sorted out I doubled checked the board and I am not seeing any thing out of place.

I will try reseating the harness and going to try checking the voltages again. One of the NE555 chips does not seem to be seated properly going to try and reseat it as well.

I will try to push the pin out but I think it may be futile, anyways I ordered another screen just in case. I guess I am confused as the guide says the following: My harness is just missing the 19 green cable, shouldn't it technically still function?

When soldering on the ribbon cable, I managed to pull out one of the wires from the harness. It fires up, but the tuner does not work. Both relays are clicking on. Here are some pictures of the cable. If I need to buy another cable, is that a possibility?

I just finished this up a few days ago. Works perfectly but the touch screen is some what loose. Do I need to use the longer screws for the 125B size model?