Search results

Another awesome pedal from @vigilante398

What a newbie fail from me, that fixed everything! Thank you vigilante. I thought maybe drilling my own enclosure had jinxed me! Thank you again!

I am using a power supply on my work bench that has 500ma with selectable 9v - 12v- 16v options. I have used it in all of your other projects with no issues. It is strange the led on the tube socket is bright then greatly dims within a second after powering it up. And thank you!

Just to see if I can get a second or third set of eyes on this. I power up the circuit and it immediately dies, thought it might be a short but I can't see anything that would be shorting out. Maybe a bad cap?

Can I use a OP07 instead of the LM308?

Sorry I have been busy and out of town, I will post an update as soon as I can.

I will try to put together a little demo this evening.

You need the jumper or no tremolo just confirmed. Used an A100k and it works fine.

One last question if you don't put the jumper for the true bypass the effect will not work. Looking at the schematic this is required and most likely why I am only getting a boost and no tremolo.

I also have a B250k

I thought I had ordered an A250k pot but apparently I did not. I have an A100k an A500k, could I sub either one?

It is just a standard aluminum enclosure. It will go into oscillation if you like, just a great all over delay. I highly recommend.

Can you post some pictures of your build? Most likely the 3pdt stomp switch is wired incorrectly.

If anyone has one, let me know. I would love to build another one.

Mind went blank but here is a super cheesy CE-2 Chorus

Do you have sound in bypass? If not something is awry at the footswitch or jacks. No LED, either the LED is in backwards or there is no voltage running to it. Check the voltages with a DMM. I can't tell from the pic, but also check that the 1n5817 is not in backwards.

Loads of fuzz on this one, highly recommend!