Search results

  1. E

    Best Power Supply

    Reverb is a better bet, and you can some times make people an offer there too
  2. E

    Best Power Supply

    I waited until I could find a used one at a good price. A used CS7 is typically around 80-90, but if you’re patient you can find them for around 60-70, especially close to the end of the month.
  3. E

    Best Power Supply

    I have been using a one spot for years with no issues. The only time I have issues is if I connect two digital pedals on the same daisy chain. Not all digital pedals, but the line 6 tone core pedals create a lot of noise if two are on the same chain. After recommendations here, I wound up...
  4. E

    Marshall Guv’nor/Guvernator- no sound

    Braided only! I prefer prebonded, braided wire
  5. E

    Gunvernator Issue

    I would try and avoid cutting the component below the solder line. The force of doing that can pull up the solder pad. Not saying that’s your issue here, but worth noting. Some of the solder joints don’t look great. I’ve posted a photo of one you should definitely re do.
  6. E

    3D printed pedal badges

    Probably not the vibe you’re going for, but if you could make these in a clear or colored mildly see through plastic, these would make great led indicators.
  7. E

    Got my Daisy Seeds

    I can’t believe how teeny tiny this daisy seed is
  8. E

    Got my Daisy Seeds

    Mine are coming today too!
  9. E

    Anybody else think it's a bit disingenuous to sell Spin FV-1 pedals without mentioning that it's a DSP?

    I think in this instance he mentioned they were designed by someone on his team named Josh. Not him, but another guy at JHS, rather than keeley. I have a feeling that Cusack is doing the guts for these though.
  10. E

    Thermionic oscillation issue

    I built one from aion and had the same issue. I lowered the internal trim pot until it went away
  11. E

    Thermionic oscillation issue

    Is this the one with the trim pot to set the low point of the gain?
  12. E

    Spatialist Reverb Distorting Notes

    This is not the same pedal, but exhibits the same symptoms that you described
  13. E

    Getting to know Daisy (C++)

    Is there going to be code available for us to have something out of the box, or do we have to code everything ourselves?
  14. E

    Spatialist Reverb Distorting Notes

    This is happening to me on an FV1 build too. I haven’t tracked down the issue, but is your issue similar to mine? You can hear it when I play hard
  15. E

    SOLVED Muffin Fuzz Triangle No Works...

    Sometimes it doesn’t look like it’s touching, but it is. Check continuity with a meter, and build an audio probe
  16. E

    SOLVED Muffin Fuzz Triangle No Works...

    Is something shorting out here? It’s a little loosey goosey
  17. E

    Promethium HM-2 Issue

    Would long wires cause oscillation in this circuit?
  18. E

    Spirit Box + infinite Dwell footswitch w/vid

    You can get them here: https://stompboxparts.com/semiconductors/belton-btdr-2h-reverb-ic/
  19. E

    Repair - Ibanez bi-mode chorus bc-9

    It’s just a tiny piece of the circle that’s broken off. All other parts are ok It’s the only thing holding the board still. Very bad design. If you push hard on the power jack, the tiny sliver of pcb just snaps off. ...Will the circle, be unbroken? Not in this case!
  20. E

    Isosceles Boost & Wonder Drive w/ demo

    Did you have the rubber stamp made?
Back
Top