Search results

I sent Robert a private message. Very very helpful builder. I thought I had a bad potentiometer at the A100 volume. It had a very low reading of nine so I asked Robert and he said the concentrate around C 14. He said a potentiometer was rarely bad but it does happen. So on my own I unsoldered...

Attractive and professional

I tried this three more times rotating the dial when I go clockwise. It starts out at one, and it only goes to nine. Note: just checked all of the pots. The other three have the correct readings. This one: when I put the leads left and center the MM reads 1.1 all the way counterclockwisse and...

Hey Robert, do you think I might have a bad potentiometer? When I test the A100 volume it goes only to 9 when you spin the knob clockwise. When I go counterclockwise, it goes all the way to 100.

Yes the Auditorium is used with all builds. I used to box them and then have trouble, so now I always use the platform first. I do have a multimeter, but I’ve never traced. Looks like I’m gonna have to learn about settings and how to.. my trouble was with the 100n

Thanks. And looking at the images in the Amazon ad they are not the same as the chips I failed at a video, but I put the 4558s in, and it was the same. Odd that I turn everything on ten and the volume A100 only allows the pedal to spit out some sound once it gets turned to 9. Once I turn volume...

Looks like I got them Yes, the light works. And you get a little bit of a extremely muffled sound. I haven’t tested it since I redid all the solder and I just checked where I got those chips from... Amazon. I got some good ones that I purchased from pedal PCB but I decided to try these Amazon...

Well, I got it up on the platform didn’t work. Checked all the resistors and caps redid all of the solder. No time for further testing today because of that Super Bowl I got a party to go to. I did have trouble with one cap the 100 and in the upper right. So I gave that a little more attention...

Such an attractive pedal, I would buy this

Pretty cool!

I populated the PCB today. Got some help with one item: the 2sk209g orientation. FYI: I used an adaptor and did not consider the girth of a 220u cap. It was a tight fit and something to consider. I decided to go with the N4148 diodes that the build called for and I made no changes in the...

Thanks much!

I’m currently working on an eight ball overdrive. It calls for this JFET when I look at the orientation in the directions and on the board, the chip doesn’t seem to be oriented correctly. Can anyone give me some guidance on this?

I have a Wampler Plexi on my board and it is glorious

All right, I made a little video. Somewhere toward the end, I engaged a Wampler Belle OD pedal. The pedal has a few nasally sounds and can quack a bit. I think my Mad Professor Snow White has more sounds.

Hi again went with the pedal PCB top Jack face plate. If you use this with the Stmpbox jig for drilling the holes do not line up with the face plate. Just an FYI.

It’s not a difficult build. There are a few oddball values on some things that I didn’t have like the 270p ceramic cap and the 14 pin socket. Also, some rather large resistors like the 3M9. It’s a pretty clean build and you get some funky sounds out of it. I guess the one thing I would say is...

OK, it works good. It does have that Mark Knopfler sound. I went with the blue LED and the blue 20 mm blue aluminum knobs. I made a little video. I have to figure out how to upload one here.

OK, it works. I love this pedal PCB auditorium platform. Works good no shorts. I probably gotta work the trim pot a little bit before I box it up. And as you know, I might screw something up in the boxing, but in the meantime, help me choose some knobs. I definitely have a problem, collecting...

The build will continue after I eat my treat from LMS!