Search results

Thanks - any links or details? EDIT: Never mind - I'll figure something out.

Is it possible to mount these in a case? https://smallbear-electronics.mybigcommerce.com/single-gang-9mm-right-angle-pc-mount-w-knurled-plastic-shaft/ I want to use these as semi-set-and-forget trims for the back of a pedal, or (eventually) a Zvex Seek Wah clone. Don't want to use hot glue...

I WAS looking at building the Photon, but it seems that the Silonex 7532 photocells are pretty much non-existent now. I have an older Easyvibe build that I was going to hand off to my cousin - if photocells are in short supply, I'll probably hold on to it. So what are folks building for...

I can work with that. :cool:

Nope - same pinout and everything. I'll report back with the results.

Had some time tonight to research it, and (oddly enough) it appears that the (older) SK30ATM-Y has the exact same specs as the 2SK118Y. I can pick up the former at Tayda - I'm going that route.

I've got an 'as-is' Boss CE-5 incoming, and the issue it's having is most likely due to the switching JFETs. The analog CE-5 uses two 2SK118Y JFETs, and I'm having some difficulty finding those. Is there an as-close-as-possible replacement for those? I'm afraid I'm not familiar with which...

I know what the OP means. The Ibanez FL99 Classic Flange has smaller chicken-head knobs; like, smaller the ones that Smallbear or anyplace else sells. Wish you could get those aftermarket.

But....but.....HOW DOES IT SOUND?

Anyone know how to add (or adjust) the mids on the Wampler Plexidrive circuit? I know the new(ish) mini Plexidrive has the mids toggle - just curious if anyone knows where/how that is implemented. Thx!

I’d be ok with that.

Yep, I'd be in for a V1 Copper, maybe a Sheriff.

What other flanger is in the works? We have the BF-2, but that’s the only one I’ve seen on PPCB so far.

Thx - I'm looking to do this: solder the tube socket to a PCB, run the wires from the main board to the socket PCB, mount the socket PCB inside the pedal case, swap tubes in/out easily. Think I found something on evilbay, but it's a little pricey - if I can find an etchable PCB layout, I'll...

Does anyone sell PCBs for mounting single 9-pin (12AX7-type) vacuum tube sockets? Going to start my Tube Driver project soon and want something a little cleaner than all of those wires running directly to the socket legs. Thx! - Buck

Thx!

Any chance for a drilling template/layout for the Recycler? I'm itching to get this project started.

I'm building a Karaoke as well, but have been slow going as I have multiple builds in progress. Yours looks great!