Missing Build Docs / Schematics

Robert said:
As long as you didn't plug in the wrong polarity power supply that shouldn't have caused any damage.
Click to expand...
Yah, something else is wrong with it. Ok, returning this thread to it's original programming. I'll shut the F up and start a troubleshooting thread. (Or wait for the new board :p )
 
Ok, I’ll ask it

You have the drill template for the Synchrotrem / Synchrowah?

Parts should be in tomorrow and I’m itchin to get building!
 
MichaelW said:
Yah, something else is wrong with it. Ok, returning this thread to it's original programming. I'll shut the F up and start a troubleshooting thread. (Or wait for the new board :p )
Click to expand...
I just started one, today. Should finish it up, tomorrow. I'd be happy to help troubleshoot. Who knows, I might have to, as well. I'm only doing a couple of mods that shouldn't change anything. I'm balancing the JFETs (Chuck Bones style from his BD-2 mods) and I'm going to use 2N5087 and 2N5088 for the BJTs.
 
tcpoint said:
I just started one, today. Should finish it up, tomorrow. I'd be happy to help troubleshoot. Who knows, I might have to, as well. I'm only doing a couple of mods that shouldn't change anything. I'm balancing the JFETs (Chuck Bones style from his BD-2 mods) and I'm going to use 2N5087 and 2N5088 for the BJTs.
Click to expand...
Looking forward to the build report! It's a straightforward build, I just probably did something stupid. I also had some questionable 2N3906's (which I soldered). I think I'm going to socket all the transistors next build, soldering in 8 transistors was probably a risky move.
 
I'll get the schematic (and rest of the build doc) posted asap. The wiring is the standard scheme.

The Recycler is basically a Crunch Box without clipping diodes. (which coincidentally is one of my favorite settings in the Crunch Captain Deluxe)
 
You must log in or register to reply here.
Back
Top