Search results

Squeaky, sproingy clean!

I actually sold this pedal to a band member who fell in love with the tone. He uses it for the riffs in "You Sexy Thing ". Of course I still use my other Fuzzrite

Looks like it's used to discuss frozen pizzas at the moment Good resource I guess :)

I didn't know that. See That's what I'm talking about. I still don't know what transistors do and what biasing is, I just know they make fuzz.

Just what I noticed on my breadboards but you guys know more than me. Or rather I know nothing and you guys actually have knowledge.

From my experimentation with MKII Tone Benders, Q1 doesn't need high gain and high leakage. A gain of 60-80 and >60 leakage seem to suffice. Too much leakage in Q1 creates a lot of noise. Q3 needs more leakage. The goal is to get Q3c close to -8V naturally, without messing with the bias. This...

I just want to say I agree with your assessment of the Classic but it's definitely true bypass so there should be no tone suck. Maybe yours has an issue? Joe Gang makes boards that fit a Crybaby shell. It might be a good chance to try out a Maestro Boomerang wah, for example. But I think the...

Mine does nothing. As I turn up the Mix, the dry volume goes down, as expected. I replaced all kinds of chips and checked the J201 orientation multiple times. It is now an expensive specimen in my hall of shame. I also had trouble fitting the 6 pots to my hand-drilled enclosure. I hate this...

Good knobbage too. A+ build.

really tiny for me. I like girth. 1.6mm would be ideal for PCBs. Say what now? Chisel is so much better. Never understood why the conical is tip is the default one. Probably because it's cheaper to manufacture.

They are white washers in blackface

I feel like I'm missing a reference but nevertheless I like the artwork and I'm a sucker for a good Fuzzrite.

Not at the moment. But it's very simple. Take male-male breadboard jumpers and stick em in the terminal blocks. When you want to test a board either stick them in the pads on the board or connect them to wires soldered to the board with alligator clips

Very nice. For my build I'm going to use shielded wire to get rid of ticking. Hopefully it works.

Looks like this varmint was poking around in a lab and he ended up doing just that.

Of course! All clear now. Thank you

I don't understand how you wired up the switch to add the 22n caps.

Now you know who to blame when the next twenty boards don't work :)

I use a hoof tip but for PCBs chisel tips work better for me as I can rest the flat part against the lead and pad. It's a bit harder with a hoof tip because it's rounded. A medium knife tip works well on larger components like turrets, pot lugs and the back of pots. I tin the tip and clean it...

In my case both leakage and hfe go down and eventually settle. It means the transistors are cooling down. Don't handle them with your hands, use tweezers. Or wait.