Search results

Sounds great. I assembled this as an always-on pedal. I had to economize on the control labeling (e.g., think of a 4 letter word for "punch"), due to real estate constraints. The artwork has that DIY look for sure. :) https://ibb.co/QCMwtYR https://ibb.co/mNrXJvP

Very pleased with a new Octagon build, it worked the first time. I am still working on refining assembly and artwork. It's a process, like a baseball game... still in the first inning. https://ibb.co/5LDX481 https://ibb.co/tqQXyRd https://ibb.co/wSzNfyh https://ibb.co/ydsWMm2 The red artwork...

Outstanding build and well designed graphics. I like the way you have those CdS cells huddled around the LED for warmth. :)

I recall I used roughly medium-high air flow and medium to medium-high temperature (your mileage may vary). You can start the temperature on medium and turn it up as needed. This should be a forgiving approach since the heat is being applied indirectly. I have the hot air rework station that...

Note, FWIW, I recently assembled an FV-1 board (Octagon). This was just one SMD part to do, so I opted to try out low temperature solder paste from adafruit with a hot air rework station. This worked successfully for me. No special tape required to hold it down. I had one unwanted solder...

Outstanding execution and graphic design, looks is professionally made. :)

Ces circuits intégrés (puces) sont proches les uns des autres, apparemment certains sont emboîtés pour de meilleurs résultats. Soigneusement souder les transistors, vous ne voulez pas les brûler. Dites-nous comment ça se passe et si vous avez des problèmes. Je pense que vous trouverez très...

Salut mon ami, à première vue, cette liste semble complète. Vous avez des boutons, connecteurs, LED, etc. Je voudrais suggérer un "connecteur intérieur DC", car il sera plus facile à assembler et à diagnostiquer de cette façon. Ceux-ci sont énumérés comme numéro d'article #716, #715, ou...

The letters are the medium size 1/4 " high. As you can see, there is a real estate limit. These were off the shelf at the retail store. They also have 3/8 " characters (online) which I will try next. :)

Thanks for the compliments. :)? I decided to leave out the toggle switch for aesthetic reasons, completely arbitrary. The lettering is done with Signature clickable letters stamp set by Recollections and Stazon solvent ink - both from a local craft store. The ink has a good adherence - no...

Awesome build, very pleased with the overall result. I decided to try rubber stamp letters with solvent ink for the graphics, for a DIY look. I had some challenges, listed here for reference: a) hole registration: LED is out of position, and the tone potentiometer is really stretched to save...

Outstanding. Hope you can share a photo or even better some riffage. :D(y)?

Outstanding. Pretty unique look there. How are the cracks done? Are those hand-painted?

Socket cap screws on top are a great design element, well done.

Outstanding quality and selection on the site for sure. I am doing this as a hobby and still ramping up. Hope to post a build report this year. :) Comment... the black pcbs are really cool, the one true colour for rock and roll gear. ? Question, is this full time for the proprietor? I am...

I use the same method... you want to have all the parts on hand when doing a build for sure. If you are planning a few builds, it helps to have a master list (bill of materials).

Still ramping up my workshop... I am going to be using a toaster oven controlled with a low mass thermistor and controller. I am planning to do some other components. Note, they have, low-temp solder paste these days, will try it out.

Hello, I am actually working on one (as a hobby). It is intended to be complementary and value-add to the FV1 boards here. I will be sure to share details with Mr. Bugg when/if it comes to fruition. So many possibilities, if you consider the example of the Dr. Scientist Atmosphere or the...

One of a kind! Very clean and neat build as always. I don't think anyone else has anything that is exactly like that. :)