Search results

In this case the feedback is analog, it’s not part of the programming, so yes, a slam switch would definitely be an option. But with the various head configurations, the feedback pot always has to be adjusted, so it might not work out as well as you’d imagine

Hey, So I just finished my Hydra delay. It sounds glorious. I used A10k for the mix pot, and B50k for feedback (see below) I wasn't satisfied with the fact that with only one head selected there was not much feedback available. And when two heads were active, the oscillation could become way...

Glad you got it working! :)

If you have one repeat, then the chip is working Your feedback path is the issue I would think, not the chip You’re getting 8v on pin 3 & 5 of the opamp? That’s another issue, again not linked to the pt2399 Seems to me there’s some debugging to do here

The 4:1 is the best compressor I’ve tried. Stunning on electric as well as acoustic and various instruments. I compared it to the Diamond comp (18v) and preferred the 4:1. Ross based comps are quite colored, they dont work well with acoustic sources The Empress comp is amazing, but big and...

Hey, thanks a lot, that's useful information! Nice builds by the way. So no plate mode ever @PedalPCB ? :) I'd switch the room for a plate if I could...

Hi guys Just a quick question about the Spatialist reverb. I found a couple build pics online where the modes seem to include a plate reverb in 1st position. Was that a thing? I’d be interested in a plate reverb! Can we confirm that the modes, from 1 to 8 are as follow: Room Hall Chamber...

Very promising! Thanks for sharing. I'll order one for sure as soon as they hit the store! :)

@PedalPCB Thanks for the quick answer! :) Is the fixed modulation a light one (Im thinking like slow light triangle wave)? I mean, if I add clock modulation on top of it, will it be too much too soon? Thanks again. Take care!

Hey guys For those of you who have a D3lay pedal or have used this algorithm in a pedal, just a couple questions. I can't seem to find any demos or quick recording of it, so... - how is the tone? Is it quite dark, analog-ish, brighter? - how does the degrade pot sound? Does it roll of the...

Actually I find that with only one head selected, it wont go into self-oscillation. Same thing on your build?

In that configuration a 10kC with a 10k in parallel will work fine I think

I can't even remember the mods (except for the tap tempo I added), but I'm glad they're shared!

Thanks! They’re cheap stamps I found online, those sold in a wooden box, you’ll find them very easily Stazon ink and clearcoat.

Smart, what a cool idea! Dipswitches are less expensive, more practical but far less spectacular!

Yes, the knobs and dress nuts come from (B)LMS. Thanks for the kind words! You're totally right about the wires. Actually when the enclosure is closed, the output wire goes right along the left side and the input wire along the right side, so they're pretty far apart. And on top of the pedal...

I couldn’t remember that name, I’ve actually been looking for it! Obviously a big influence for me. I had come accross pictures of his pedals a few years ago, and really loved them Dont think the company exists any longer though... ?

Haha yes they’re actually there to allow access to the treble boost trimpots and the dipswitches

Thanks guys! :)

Hey guys First time working with a pcb from pedalpcb, and it went quite smoothly! Just a KOT clone, with the latest updates from the freestompboxes forums: - high gain / low gain resistor change (100k/1k) - input cap is 22n instead of 10n - low gain feedback cap is 47pf instead of 100pf -...