Hey guys
First time working with a pcb from pedalpcb, and it went quite smoothly!
Just a KOT clone, with the latest updates from the freestompboxes forums:
- high gain / low gain resistor change (100k/1k)
- input cap is 22n instead of 10n
- low gain feedback cap is 47pf instead of 100pf
- 1N914 for the hard clipping diodes
For the soft clipping section I went with BA282, which are supposed to be exactly similar to the originals MA856. They sound very good, but I'm not sure 1N4148 would have been much different
I elevated the treble trimpots a bit with sockets, to allow a better access from the holes on the back of the pedals
That one is for a good friend of mine, I took my time to plan it and build it!
Cheers!
First time working with a pcb from pedalpcb, and it went quite smoothly!
Just a KOT clone, with the latest updates from the freestompboxes forums:
- high gain / low gain resistor change (100k/1k)
- input cap is 22n instead of 10n
- low gain feedback cap is 47pf instead of 100pf
- 1N914 for the hard clipping diodes
For the soft clipping section I went with BA282, which are supposed to be exactly similar to the originals MA856. They sound very good, but I'm not sure 1N4148 would have been much different
I elevated the treble trimpots a bit with sockets, to allow a better access from the holes on the back of the pedals
That one is for a good friend of mine, I took my time to plan it and build it!
Cheers!