Search results

I am happy with how the tiny print silkscreened.

Not pedal PCB but based on Je Taime and Van Pelt Drive. I have been using these together for about a year, so I laid them out and had them built by pcbgogo and put them in a box together. "I Love You" and "Charlie Brown" made me think "Little Red Haired Girl". The cap and yellow wire are for...

This is what I have come up with as a enclosure silkscreen idea for Module 8. It will be light blue Apollo Command Module 8 on a lighter blue enclosure with black text and indicator lines. The dark circles are where the edges of the knobs will be for visual reference. The tiny circle is where...

I haven' t seen one in person. Is the sound better than what I am getting with FV1? I think the Module-8 is awesome. It seems the big thing missing from Module 8 and Octagon is the rotary. Is that harder to do with the FV-1 than other types of modulation, or is it just not as popular for people...

NOTICE: From testing, I think the width and feedback labels are swapped. Don't copy my labeling without checking for yourself. This is enclosed in one of the pre-drilled Tayda enclosures. I hand soldered the FV-1 from electro-smith since PedalPCB was out of stock. The design is supposed to...

Sounds pretty awesome. I feel like there are more sounds locked in it, but I just don't know how to set the controls yet. I have to agree that this one is sensitive to how the input and output are routed, or you will get noise. Do most people put this in front or after their dirt pedals?

I just bought one of these. I could probably use two. Taking the back off and looking made me wonder if this is beyond what most people here want to get into. I admit that I find the 208 pin LQFP of the main processor (ADSP-21375) intimidating to hand solder. There are two circuit cards almost...

Has anyone build a Kaleidoscope and used the Tayda predrilled 6 knob enclosure? It seems that while the hole is big for the switch, it is still quite a bit smaller than the nut.

I changed Q5 and Q16 to 2n3819 and swapped R17 for 47k to dim the green segment of the LED. I think it actually sounds better with R17 at 47k. I didn't expect that to make a difference in sound. I just wanted the green to not be so bright. You may want to socket Q5 and Q6 for this build even if...

I got this tolex with the idea to embroidery the design. But tolex isn't really fabric, it just gets cut up, not really stitched. So I am on the search for real fabric that looks like this. I also got these cool miniature chicken head knobs from amplified parts. The standard chicken head knobs...

I put a CDXL Envelope filter in my shopping cart. But there are no build docs and I don't know what the symbol is under the 1N5817. Does anyone know what that part is? How does this compare to the Waddle Box?

I replaced my XR2206 with the ones from Jameco. Now the LED seems to flicker, but is very bright. I don't notice a modulation of the sound. The image of the output from the oscilloscope is stable too and does not seem to be modulating. Any suggestions welcome. I have attached photos of the...

It has the LMS falcon knobs on it now. I plan to get blue magpies with my next order.

Sounds pretty bad until you get the jfets biased correctly (see directions on schematic), then its pretty awesome.

It would be awesome if you could get the C100K duals in right angle PCB mount, but this pedal sounds great. The design is silk screened onto the enclosure.

For some reason I didn't order the C100K Dual pot from tayda so I thought to get to their $5.00 minimum order I would try a predrilled enclosure. All the 5 hole predrilled enclosures I see at tayda when searching "appear to be wrong for the Photon Vibe. They have the led on the top and a knob...

If you don't have 5 MPF4393 laying around, you may want to look for some before you order Bohemia so you can add some of the SOT23 adapters to your order. The ones I found were over $5 a piece. Mouser has the SOT-23 ones for less than $1.

I just noticed that the 3PDT footswitch from lovemyswitches is $0.20 cheaper than tayda. I have used one of lovemyswitches "super premium" switches and it is definitely nicer, but also definitely more expensive than I want to pay. Has anyone compared their $2.30 footswitch to the $2.49...

Does anyone have the parts list for the new woodpecker? I have one on order, but it hasn't come in yet. I am trying to get my tayda order in. The picture of the silkscreen online has the component reference numbers, not the component values. Thanks!

It looks like several hot air rework stations are available from Amazon for less than $100. Has anyone here had good or bad experiences with any of these. I am thinking of getting one.