Search results

any tips on spacing of control labels? (knob labels for: level, drive, bass, treble, etc) Also, do you just overlay the drill template from PedalPCB build docs onto Taydas illustrator enclosure templates to get a feel for layout while designing the graphic?

Not sure why I thought that video said to only have an input jack plugged in LOL Thank you so much for your patience @temol finally got it working!! A little quiet but I know how to adjust that now! One thing I noticed while adjusting the trimpots: the jump in voltage was high between 3-7V...

hmm, that entire range including 20V reports 0.00 or -0.00 Even tried it on brand new J201s from Mouser. Sanity check: The pedal is not supposed to be plugged into power correct? I just have an instrument cable plugged into the input jack as mentioned in the video @Nostradoomus linked above.

So I've been trying to bias the MPF102's using this multimeter set to the 200K option at the bottom left. (this is the only setting that's giving me a reading) Touching the ground meter lead to the GND wire at the bottom of the auditorium board And the positive meter lead to the Drain of the...

SICK!!! @Nostradoomus I have not biased them. Got em from pedal hacker electronics. I'm new to this and my multimeter is a pos (looks like this should be my next investment) Which mode did you use on the meter to test the transistors? @temol This diagram is helpful (I think I understand your...

Hey y'all. Having trouble with my Boogie Monster build. Not getting any sound thru the Auditorium test platform but the LED lights up. (I don't think the auditorium is the issue.) Here was the test setup (is the wiring correct?)...

https://drive.google.com/file/d/12xGaFe66w-QUGI368MKTQdeAMZRu_HtC/view?usp=sharing Hmmmm, heres my setup. Not proud of the soldering (trying out some kester 44 63/37 .6mm) but like, I think the joints should be ok... could the excess flux splatter be messing things up?

Could someone please post an example of using the Auditorium with a pcb wired to it? Not sure if I'm using it correctly. Not getting any sound when its active but the LED of the board I'm trying to test does light up... I do get signal thru the auditorium board in bypass and when its active...

I was wondering if this was possible! How did you specify that you wanted the 4-Knob Type 1 drill template for the SOB with paint and UV printing? Did you have to upload a separate drill template or something?

Is this the Kester 44 y'all are referring to? Looks like this one should be 0.6mm Amazon link to Kester 44

yoo I'll seriously buy a B2M off you 😂 $$ + a 6pack of ur fave beer for going thru the trouble to send it out. can't find em anywhere lmfao

I'm using the LMS feather soft / Gorva switches (which feel amazing. This is the only switch I'm ever gonna use. Well worth the $) I had to bend the lugs a tiny bit but the fit is super tight which I think is what we want given the perks @PedalPCB mentioned above...

Hey y'all, I'm sourcing parts and can't find a JRC4580 IC. Has anyone used a substitute for this build or a similar one? **Edit** if anyone has 2 for sale hmu! https://docs.pedalpcb.com/project/Parthenon.pdf Thanks!