Search results

Blumes?

If the pedal is working with the sound and controls the way you think it should (aside from those noises), then I think your next step is to see if the noises go away (or get much better) when the project is inside the closure. Even the noise you get when touching the shafts may be because the...

Some of the background noises you are getting may be due to the effect not being in an enclosure that would shield it. If you already have a drilled enclosure, install the board and see if that helps. Are you planning to leave the daughterboard connected to the main board? Or just avoiding...

you will not have one wire directly connect the "out" on the circuit board to the footswitch. you are putting the volume pot in between the "out" and the footswitch, meaning the "out" wire from the PCB goes to the volume pot and a wire from the volume pot goes to the footswitch where the wire...

Got it. So you want the option of being able to go louder or softer than unity depending on the setting for the external volume pot. Are you using the PPCB board? If so you will need to consider how the pot placement will affect the circuit board (and LED) placement. I suggest looking at the...

Is your goal to have a pot with an in/out footswitch and no other controls? So the top of the enclosure would have the footswitch and LED on it but no other hardware? Isn't that what the build document already does? What do you want that is different? An internal way to reduce the output...

interesting Q&As with the Bard. Thanks for sharing them.

Thanks. I asked just because the top appeared to be unchanged. Thanks for the extra effort and time you have put into this updated board and case.

What changed for the drilling positions for this set of enclosures compared to v1? Was it just the positions for the power and jacks?

If you used SPDT on-off-on switches in the phase position, would the off position turn off the signal for that channel?

Maybe the standard advice to folks in this circumstance should be to keep buying new low tide boards from Robert and try again. : ^ )

it is not even clear at this point there is a build that may have a problem. could be just curiosity or a very ambitious person wanting to do a vero layout.

also a possibility the in and out jacks are wired in reverse.

you can get a link to the schematic from this vero layout

No big rush getting this sorted out. No doubts here that everything will be righted for the board and enclosure I received. And kind words to you and Jeff since I believe you were accelerating getting the orders live to accommodate those of us on the forum. Thanks for that push and the course...

Almost looks like a "Pass" control. A bit more detail in the stem for the wineglass and it could be a P*ss control (your choice of vowels)

Isn't someone else on the forums doing custom colored faceplates for pedals?

I never did track down the errors on my vero build for this, but Dave was kind enough to share his build files so I ordered the board and assembled it without issue. Really nice design that matched well with some pedalpcb drill guides. I am really happy with the sound. It is tighter and...

To some extent mojo also relies on the ability to describe the product in very subjective terms that translate a sound into a different sense. Like talking about the texture of the distortion or the temperment of the sustain in a circuit. Sniffing the cork usually results in describing the...

I see that "live, laugh, love" is an option for the supersonic enclosure. now that is customer service.