Search results

I finished my 3rd and 4th builds. Small con for both of these builds..... holes.... so many holes.... they each have over 20 drill points lol. The xenotron / lovetone flange with no name. I had some issues with this build, you can view my troubleshooting post about it. After that I really...

I calling this one fixed. In the end it's working but once I got it in my bass rig I didn't like it for a few different reasons. Gonna make a build report with that and the spectron.

When I was testing on the pads seemed like i had to move the probe around to get a reading. But it seems to be working now. I'm gonna re bias the regen and bbd tomorrow and hopefully close this.

The R26 was the proper 39k but I felt wierd about the resistor slot itself so I replaced it with a new one. There was no difference but jumping the resistor is making it work correctly. I'm not really sure what the issue but it seems to be with that slot. At the point I don't even know if I want...

So that's what I did and I was able to track modulation all the way up to R26. On the other side of R26 there was no longer modulation. So even though the resistor reads correctly could it still be bad? I did do a reflow on it but didn't replace it.

Just to catch up. Using the mono/Space out Produces little to NO modulation. Using the Time Out /Stereo jack works and produces modulation. If I Jump the Time Tip and combine it with the Space Tip it works and produces modulation. So, based on what I can tell the issues is however the time...

I need to put this on hold for a few days as I melted some of the jacks when i started to de solder everything. Talking to Lace sensor he thinks I just screwed up wiring the swtich jack since I had a signal when I jumped the time tip to the space tip which makes sense based on my rats nest.

I might give the probe a try, just have to make one. But shenanigans is right, reading the schematic makes it seem the transformer only plays a part when the time signal is separated into its own out. I don't see where it mixes back in to the space unless I'm following it backwards around the...

Just hit a breakthrough, I was going through @Kris100 Thread and came across his post where he jumped the time tip into the space/ mono out tip. I did that exact change and boom we have modulation. I just need to re bias since I was randomly moving around to try and fix it. Also one of my led...

I was testing the case and on. I would describe kinda of the same issue you were noting, there is some vague flanging and self ocilation at almost full cw settings. The biggest thing that's getting me is the led on the daughter board, when the time section is off the led seems to be the...

I sourced the exact LED that was specified in the build documents from Mouser the clear green one. It does seem to pulse correctly and respond to the controls but only when then the circuit is off..... When I turn it on the LED becomes solid no longer pulsing.

So, for my third build (second being a seabed delay) I decided to do something stupid and build this. After finishing the build, the vibrato (space) seems to work fine. but the modulation s(time) section doesn't want to do anything). also noticed that the loop doesn't work. I think I Did...

First build has finally been completed. Decided on the lamb chop since I wanted to use the pork loin on my bass again, but the internal pots bothered always bothered me since I liked to be able to change them without having to open the pedal. While building the pedal I did what is called the...