Search results

Lmao. OK, marking this thread solved! Thank you, @jwin615 .

Pardon my inexperience, but how would I test that? I bought the relay and board well over a year ago, so I guess I just assumed the compatibility. If I have to start over I'm happy to order some fresh Kemet relays + IRB boards + EEPROMs from Robert but I'm hoping I can maybe salvage one of the...

I can reflow them some more, but the LED is working as it should (both momentary and latching) so I'd assume that means the input of the footswitch is being detected properly? I've also trimmed down the extraneous wire at the In, +, - and Out solder points too.

Bump! I swapped in a fresh EEPROM, reflowed the solder on both ends of the Switch and Ground connections of the daughter and main board, but the issue persists.

Having just done my monthly Costco run yesterday, I especially appreciate the graphics choice/execution here.

Yes. I do this and love the increased headroom/volume. A rule of thumb I operate by for 18v is to ensure the caps are rated for at least twice that, so there's a lot of 50v and up in my builds regardless.

Beautiful work! I love the Mk3/Mk4 design approach and sound, this is a hell of an impressive effort.

Remembered I had a spare board, ATTINY85 and relay for the Intelligent Relay Bypass and decided I wanted to have another whack at wiring it for the bypass switch of my Leprechaun. It responds latching-wise as expected, and with the LED in unison...but the pedal remains on no matter what. What...

@Robert threw this entire kit in with my order from last week. I assume it's from the BuggFX days? My perception is that BuggFX was his DIY pedal company before PPCB took over as the business priority. I noticed that Daydream used to be a full-on pedal he sold. I don't want to go into detail...

Sonny is the man and the one time I went to Atomic was incredible (I was at college just outside Baltimore in the mid-'00s).

Having just started learning Discordance Axis tunes yesterday, and a lover of them and Assuck, I am absolutely interested. This is awesome.

Hours upon hours of clumsily resoldering and loudly cussing 😂

EXACTOMUNDO Please do! An expression-controllable white noise generator with a momentary dub siren would be a dream come true.

I dig the graphic. Biblically accurate tonal transparency.

My bad @jcpst, my question was regarding this change @Robert mentioned.

So I should try this out once I start populating my board, is what I'm hearing here. Just to be sure I'm picking up what you're putting down: are the respective lugs still soldered to their holes and then connected by an additional wire? Or are the lugs lifted and then connected by said wire?

Great colors + I'm a sucker for clean diagonals in any design scenario! This is next in my latest batch of boards from Robert and I too love the wildness of the little PLL I've tasted so far. Extra stoked now 👍🏻

Whoaaa. This is incredibly up my alley. Anyone wanna make PCBs so you can take my money?

Thank you! As far as I can remember, yes that's the case. Mine was noisy only with the Gain dimed, as mentioned in my post. You might consider emailing Huntington Audio directly, though--dude is quick to respond and incredibly nice.

Update: I started with a fresh 3PDT and just wired it as normal sans the SW solder point. Put an indicator LED + 4.7k resistor between the switch's top-middle lug and the positive voltage leg of the 9V jack. It works as expected. Still no luck with testing the solder points of the Throb LED on...