Search results

If your using a j201 with an adapter board be sure you have the legs in the right orientation. I've got a similar issue with my low tide and I'm pretty sure this is the problem, unfortunately I fried my randomiser ic debugging. A replacement should turn up next week though. Forum member...

This has been a great upgrade to the standard solder suckers. It has sacrificial/replacable silicon tips. You can suck up the solder while the iron is still touching the part. The silicone tips are very hardy. I'm still on my original tips a yr after buying it...

Started using silicon stranded wire recently, It's a step up from pvc but solid looks best.

what layout are you using? the revised one (where ic 4&6 are orientated differently) or the one in the build doc?

Thanks, i had missed that.

No, that didn't fix the issue. I'm starting to think the 3207's i've got are duds. They were NOS bl3207 i bought from ebay. Good news is i've ordered some V3207D from cabintech thanks to the stickied thread. Bad news is i think i've fried my randoimizer while reading voltages. But pedalpcb...

Awesome, thanks! I would never have found that. I'll go swap it out.

I used this numbering system.

Sure, i hope ive done it right, the ** is where the volatage was changing (i guess due to the randomizer?)

Still not working correctly. I thought it was jsut a matter of tuning but its still not making any effect to the audio. Can someone confirm i have the IC's orientated correctly, build doc hasnt been updated with the new layout. Im going off the picture on the main page. I've soldered the...

Thanks man, think ive got it now. One of the bat48's wasnt seated properly. Jsut need to tune it now!

Just boxed. Im getting audio when engaged (also when bypassed) but no noticeable effect. Mix and level knob pots are working, the other pots dont really effect the audio. Any tips on where to go from here? I can post voltages if needed. Thanks in advance!

Now youve said that i remember that i've built another pedal that reacted the same way, i think it is as you say. Hard/soft clipping. Thanks for chiming in!

Just finished the build, sounds great but i just want to check if all four 3mm leds (d1, d2, d3 ,d4) light up when playing? Ive attached a picture, the 3mm leds in the green circle light up when playing, but the 3mm leds in the red circle dont light up. I've tried the switch in both positions...