Search results

Hey peeps. I got this washburn stereo chorus scx.7 in a lot of broken pedals cuz it was missing the back of it's case. So I rehoused it and it just barely fit into a 1590bb lol. Just a janky spare parts rehouse nothing special. But I'm getting a ticking noise when bypassed (clock noise?). When...

So apparently there are new production 1n34a's from new jersey semiconductor, and "pedalpartsandkits" is selling them. But stompboxparts seems to have old ones and apparently the batch is within a tighter spec. Do y'all have any advice on which I should get or any experience with the new...

Would you trust this on the basis of whether you think its actually isolated in the sense of ground loops/hum/isolated output? Or if you think mains is likely to arc and mess it up etc...

I just finished my muzzle and the led is staying solid red whole turned on instead of switching between red and green while playing no matter how I adjust the knob or flip the h/l switch. I tested it while in an enclosure, while out, using sidechain jacks, without sidechain jacks, tested the led...

I'm using the power io module in my muzzle build and I'm gonna finish it up soon and I just want to check because I havent found any wiring diagrams with that module, should I run the grounds from the main board just to a ground point of the jacks that poke through? Because I see an additional...

I saw the capacitor type post in general and decided to check if i ordered the right types the other night for the muzzle noise gate and some of them are wrong according to it. I did a little research on caps and the schematic as well. So I'm wondering as some pre troubleshooting is it worth...

Is it gonna be march 14th? I ask because at my job some of the companies we get stuff from have told us restocks would be then (due to corona/wuhan, imports, etc...). Another question, is the restock for https://www.pedalpcb.com/product/ic-that4301/ delayed until then? Because as soon as it's...

When I turn on my obsidius preamp the distorted signal doesn't come through (only raw sound and some sizzle). If I flip the toggle switches a million times it will come through, but then I try to flip it to the ones I like (or again at all) it cuts out again. To get it to the setting I like and...

when i have the blend set to have the distortion sound in it too, the gain knob is just adding some fizz, but it doesnt seem like the signal is actually passing through the distortion part of the circuit, though the switches seem to be effecting the tone. Any common problems/mistakes people have...