Search results

Checking to see if these subs are OK for the green russian muff. R5, R11, and R16 are supposed to be 390 ohms, all I have is 330 and 470. R22 should be 2k, all I have is 1.8k and 2.2k. If anyone has some input I’d be much obliged!

https://forum.pedalpcb.com/threads/distortion-250-problems.5020/ Here’s a useful thread.

https://forum.pedalpcb.com/threads/distortion-250-problems.5020/

I just built one and like many other people, I didn’t like the B1M. The bulk of the gain comes in only in the last 10% of turning it up. I imagine the problem would be there with the B100k too. You might want to try using a C taper if you can get one, either 100k or 500k.

Hey, looking to see if anyone has built or has a layout for a feedback looper. I’ve heard a phase inverter is handy, any other bells and whistles I could throw in there? Maybe a boost circuit?

Do they keep a warehouse full of stuff in CO? My theory is that if they have everything you order in CO, it comes quickly, otherwise they have to wait for certain items to come in from Thailand. I could be totally off on that. I’m in MD and I always get my stuff pretty quickly, within 2 weeks...

Hey, just thought I’d chime in @ttolliver - I use the cricut as a mask/stencil or whatever you call it, and then paint over it. Removing the vinyl is definitely the toughest part. I’ve had the most luck with tweezers. Here are some I’ve done with this method: I was wondering if you’d be willing...

Awesome, exactly what I was looking for. Thanks!

Ooo never seen that, very cool. Unfortunately the gain pot on the blues driver is dual gang, so it looks like that won’t work, unless I’m mistaken.

Hello, looking to do two footswitchable gain pots on my blues driver clone. Wondering if anyone has done this, or has a layout to do it?

Hey - I've stamped a bunch of pedals, wish I could give you some advice but it seems hit or miss for me. I had luck with Tayda's powder coating for maybe 6-8 enclosures, but after I had a few crack in a row, I've stopped doing it. I tried a couple other places but both cracked. Love My Switches...

Hello - I built a few Pythagoras pedals and a Spatialist, and I figured I would try to load them up to cover every patch available here and put out a video with samples of all the patches. So here it is! A few notes: - I did this last night while the kids were asleep so I had to keep the amp...

Hi, wondering if anyone knows if the modulation/filter on the DMD-2 is always on, or if they can be dialed out when the knobs are all the way down. Also have the same question for the delay presets on the custom eeproms - are there any delays that can also act as a straight unaffected digital...

Thanks for responding. Gotcha, I figured it would be something like that. oh and just to specify I was referring only to electrolytic capacitors. I have a few follow up questions if you don’t mind. Do different charge pumps have different functions, or is controlled by the components that are...

Hello, I just got started building pedals earlier this year and at one point early on I ordered a ton of 16V caps. I'm wondering now if there are some pedals that I shouldn't use them in. For example I just built a Phase II and I'm about to build a Paragon - both have charge pumps. Will this be...

Great, thanks for the response!

Hello, had two quick questions if anyone here would be kind enough to answer. Just finished the OCD / ADHD - is there any way that I can test that the buffer/bypass switch is doing what it should do? About to start the Phasor / Phase II - the build docs call for a yellow LED in conjunction...

Ok I’ll check that out tonight. Thanks! I’m too colorblind so I rely on my wife to figure out the codes. Or use a multimeter.

I’ve built two, and the voltage decreases as you go CW. However, I never lose signal. It starts getting sputtery around.. 2 or 3 o’clock I think? I can check for you later if you’d like.

Cool, thanks. I’m going to try the advice above from Music6000 and I’ll let you know how it goes.