Search results

Nice to see modules here! <3 Here's one that you might want to consider: Trapezoidal Envelope Generator. https://djjondent.blogspot.com/2020/10/ems-synthi-e-trapezoidal-envelope.html Definition from somewhere: "A style of envelope generator used particularly by EMS. The envelope it generates...

Yeah, looks like I'm going to have to join you soon and figure this thing out :) Thankfully I now know this thread exist!

Would lightly sanding the enclosure with something like 1200 grit (which can easily be clearcoated back into perfection) be an option of getting the new glue to stick? I bought the new glue as well, as I had to order the whole batch of things from Korea anyway. Looks like I'll have to do a few...

That's what it means! Instead of setting the toner print in place with film and all, as you do with water slides, you glue the toner to the surface with film free.

Here's a bit about the Sunnyscopa glue types... W1+ is for smooth hard surfaces. W2 is or porous and rough surfaces. GW1-Pro, a replacement for Glue W1, W1+ https://www.sunnyscopa.com/products/glue-w1-w2?variant=36426925244582

Not cheap, but you can buy white toner that you can simply swap with your black one. For those who prefer dark enclosures. Just need to check if your printer is supported. https://www.ghost-white-toner.com

PDF'ed! 🤘

Wow, thank you sir! No need for a voltage doubler... I got plenty of power supplies with voltage selectors.

Thanks man! Can these inversion boards of you be modified to run ±12, ±15, ±18 etc? Could be handy for stuffing old and new modular stuff into pedal boxes.

Repair turned into reassignment.

Heavy stuff. That one comes from a Vietnam war movie! ... Though I forgot which one. About breaking down.

Congratulations on getting your first one up and running! All the visible scars on the board tell a story. Then again, some red component-covering goop on the board would get you a true pasta pedal! <3

Depends on the one you got.:) The one on the top right here is for those red dotted ones. The one on the bottom left takes the upper red dot and the bottom two blancs.

No tone! That part of the design language too?

BTR: A type of slap, usually performed in a swift, powerful motion; and of the Backhand Method. Stands for Back To Reality. Used to combat delusion.

So strange to never have thought of using SMD caps. It's as if I got brainwashed by the through-hole cult to block out any such considerations. :unsure: Also, is shrouds what those plastic bits are actually called? Bottom-covering things come in lots of names, all of which are not shroud...

https://effectslayouts.blogspot.com/2014/11/jordan-bosstone.html

Came for the lettering, stayed for the skateboarding. 🫣 [X] Since this is a public part of the forum, I will remove this image after I made you remember this. 😅 Enjoyed the keystep jam as well. Moody!

Ah! That's where the cicles come from! I wasn't careful and ended up learning a thing today. 😅

Think of how images look in newspapers. That's the greyscale one. A way to produce gradient with just black. If you look closely at magazines like you might see the color halftone variation, via the four basic colors that consumer printers are loaded with.