Search results

I think this should work: https://drill.taydakits.com/box-designs/new?public_key=RHNCR1R5aEtRTzVYQm5IU0xCQk1NUT09Cg== You may want to make the center holes a touch smaller for the switches.

Nice pedal, but no guts no glory!

So I got around to boxing up another one of these with all A100K Pots, like it much better, but it seems to me the GE diodes and the SI diodes on the left side are reversed. The switch position GE on the left sounds like the switch position SI on the right and the Position on the left label SI...

I use those and mis drilled enclosures to practice lettering painting, but not nearly often enough.

You can easily build one of those, it's just a 100k pot and two jacks.

I had a Rivera Rock Crusher for a while, was pretty good. Years ago I had a Hot Plate which also worked fairly well. Now days only the dog is bothered if I play loud.

When I order boards, I like to scan the components section for anything I might need. FV-1 projects I usually order with the Chip installed.

You can get TL072's from @PedalPCB, another good reliable source.

I Try to buy my IC's from Stomp Box, Digi-Key or Mouser, especially the ones known to be popular to fake.

I had already sealed the package, so I slit the top enough to drop them in and taped it closed. Will try to get to Post Office tomorrow.

Seems like I bought some subs for the 2134's a few weeks ago, if so, I'll throw a couple in the package with the transistors.

How many do you need?

Inkjet waterslides is why I went to a LaserJet printer!

That's what I use white washers for!

Digikey is where I found them.

I have some of those incoming. I can send you a few when they get here.

Couple of those solder joints like the in jack to the board look suspect.

Ditto on the Ditto

Free shipping direct from their site: https://www.thepedalport.com/the-pedal-port

I try to set my temp to the task, soldering a board I'll run at 700, desoldering I generally drop down to 600, SMD maybe even a tad less.