Search results

2N3903. I'll have some in stock by the time the PCB is available.

https://docs.pedalpcb.com/project/Schematic-Acrobat.png

I think you blow in through one of those holes to spin a tiny turbine inside...

To be fair.... there's at least a little going on in there... It stumbled across the bench, I figured I might as well.

It's not a fu..... oh wait, yeah, it's just a buffer...

Tricky tricky..... but folks have already done similar. :ROFLMAO: https://forum.pedalpcb.com/threads/this-is-why-i-dont-trace-circuits-from-photos.2698/

Seriously though, I'm just visually inspecting those caps and assuming they're unchanged... and that means nothing really. I won't know for sure until I measure them out of circuit, but this one definitely has been piggybacked to increase the value. I suspect those to be the only changes...

But..... they're already on a switch. :ROFLMAO: Can I put the switch on a switch in case I don't want them to be switchable anymore? ... right, but then someone is going to want that switch to be switchable... 😞

The sun and moon are like, completely different man.

I'll get a full parts list for you later today, but: 3 x MP39b 1 x TL072C 1 x TC1044SCPA Q1 hFE=43 at Ic=5.00mA Vbe=0.211V at Ib=1.00mA Vbe=0.323V at Ib=5.00mA VceSat=0.042V at Ic=5.0mA and Ib=1.00mA IcLeak=0.039mA Q2 hFE=64 at Ic=5.01mA Vbe=0.215V at Ib=1.00mA Vbe=0.317V at Ib=5.00mA...

Looks like the difference is clipping diodes, a capacitor, and the Filter toggle switch is fixed in the Left position.

I think you want/need an iron where the heating element is integrated into the tip itself, rather than in the handle. The tip I use is the Pace 1130-0501-P1, I use it with a Pace ADS200. I think the Hakko equivalent would be something like the FX-971.

Have you seen @captain's stereo Low Tide? I mean, it's not a 1590BB but still.... Dual Mono/Stereo Low Tide with some Mojo

It's one of the best tool purchases I've ever made. Not once have I thought "Man, I really spent too much on that."...

Nothing wrong with that really. What I don't like is when someone slaps different artwork on the exact same pedal and pretends it's a totally different pedal... How can the same Crunch Box clone sound just like Angus and Gibbons?

Probably....

You never know, Aion might trace it one day.

Install C2 and C14 opposite to the polarity indicated on the silkscreen. It'll work either way, and you might prefer it as marked on the PCB, but technically it's not correct. Glad you reminded me, this thing is still plugged in on the shelf. I need to check the cap soon.

And while we're at it.... @Ginsly