Search results

Is there any why I can help you with this. Did you port the whole library or just the part you were interested in. I am interested in a few of the effect as well. Let me know if I can be of assistance.

Just finished building the Terrarium, minus the stomp switches which I am waiting for. The first effect I got to work after blinking the LEDs was your verb. I am on windows 10 and after following the "setup your development environment" on the daisy wiki I was able to compile and upload from...

Make sure you screw the studs onto the slider board before you mate the boards together. I actually used the faceplate to hold the sliders in place before I even soldered them. These instructions from the project development thread are really good. The faceplate does a good job of covering my...

Not fully complete. Waiting for 5/8 step drill for led stomp and my little elephant in the corner. This was a really fun and challenging build. Really hard to do the enclosure with hand tools and files. My power is also too low because of the plexiglass. This one is imperfect but then again all...

Bass and Treble are on the wrong side aren't they?

Well I put you in anyway :)

I am going to buy the daisies and if you can get a kickback from referring us to their site to purchase their products I would like to give you credit. Please let me know so I can order and hopefully contribute to future development.

I like the pour. Great looking pedal.

Right now it is probably the Thermionic which I just completed, the Isosceles and the Circulator. Being a 80 Metal Head I haven't learned to use the Fuzz all the much. The Quarantine Fuzz I probably use the most as I can get some good metal sounds out of that. My biggest problem is that I work...

I am so tempted to get a CNC. But I need to start using and improving my skills on the things I currently do before i start learning a whole new set. Trying to finish up the pedals I have before I build the next batch. Can't wait to learn from your CNC exploits.

These are while working full time throughout. This is all nights and weekends. I have been very busy.

The end of the drips are the clipping LEDs so they sparkle when you play.

These are the Pedals I have completed up until today from PedalPCB since I started making pedals in March. I want to thank the people of this forum for fostering a great new hobby. I have learned a lot from many of you. You may see some slight mods on the pedals that have been inspired or...

Pandemic Pedal #35 Just got the knobs from Love My Switches. I have been loving the sound of this pedal.

Pandemic Pedal #31 I had to fix a bunch of problems I had when building this pedal. My elecrolytics were too big so I had to leave the leads long on one and lean it to the side. The 560nF cap on the left is under the board because the one I had was too wide to fit. The red/blue LED I had was...

Right, no power.... it would have to be a hacky mod right now. Which would be tough in such a tight space. That quick reply saved me $20.

I believe the PTL30 Bourne slide potentiometer with LED from Mouser would work as well. Correct? These would let me see the setting in the dark or on stage.

I know this would be a lot of work but would it be possible to get the control labels on the drill templates. I have trouble with a lot of pedals knowing how to label the controls on the enclosure. A good example is the Obsidius Preamp. I can figure out the potentiometers from their values. But...

Its procrastinating and will do it later.

I also got mine there. It did take a month to get to me in the US. Built the roboto and it works great.