Search results

I had a feeling it would not be easy. And I believe it is only the film caps that I need measurements for. I am hoping that someone may have some ideas of ranges just from the circuit design and where the caps are placed.

I am trying to trace the KMA - Tyler The Freq Splitter. I am having trouble figuring out how to determine the SMD capacitor values. There are no markings on the caps and if I am correct they can not be measured in place. I am unsure of the values of C1, C4, C5, C14, C15. I am guessing on the...

I've been enjoying the sound of it. I am not used to fuzz tones so I am trying to learn some songs that use them This one I like because I can get some metal tones out of it.

Drilled the hole with a hole saw and used plexiglass and epoxy for the window. Everything you see is part of the circuit. I just twisted it up to make it look infected.

I'll just put it in the build reports and see what comes of it in the morning.

I want to post my quarantine fuzz build but I am concerned that some might find the images offensive. I am new to this community and want to continue to share my builds and would not want to have other look unfavorably upon my work. What are the guidelines for community standards on this board...

I bought this planning to modify it and before I could get to doing it the duocast came out. So I just stuck to the instructions. I believe this had an AC125 or 128 in it. I just keep buying transistors from pedalhacker and PedalPCB keep giving me projects to put them in.

I really like the sound of this. I used AC151s. Flower was inspired by my daughter.

I've spent the last month playing with all different kinds of art to create this. It has gone through a few revisions. I really like the sound of this one. I hope you enjoy.

I've really been enjoying building these pedals.

This is an extension of the functionality of Test Box 2.0. http://tagboardeffects.blogspot.com/2014/09/test-box-20.html Everything is there including tagboard and schematic. It has a little noise when in bypass that goes away when I direct sound through the pedal. The wave generator is a...

Which type does the minidrive use? I have both and I can not tell which it is.

What is the direction of the middle position of the on-on-on DPDT on the minidrive? Is it: d - [ | | ] m - [ | . ] u - [ . . ] d - [ . . ] m - [ . | ] u - [ | | ] or d - [ | | ] m - [ . | ] u - [ . . ] d - [ . . ] m - [ | . ] u - [ | | ] ?? I am unable to...

Thank you. I hadn't thought of that. I will be sure to do that in the future during debugging sessions.

I reflowed the solder joint that connected to VREF. Finally I inspected the area where I was getting 0 volts between C8, R10 and pin 7 of the LM833B. I had a small scratch on the PCB near the pad for C8 and I believe solder had flowed into. After cleaning that It is now up and running...

Updated so information is easier to see without leaving the forum. I like the linking of media. It is a nice feature. Thanks for whatever knowledge you can bestow upon me. ?

I just built the stockade. I did the wiring for the boost to be used separately. The boost and bypass work great. But I am not getting a good signal after pin 7 of the IC. I am using a LM833N, I have tried different ones, including different brands. I also have an album with images that includes...

Thank you. That works great. I was able to get it to work with a 3mm red LED from Tayda and a 4.7k resistor between the LED and ground. I will be doing a little more testing this weekend with sound before I wire it up, but I like what I am seeing so far.

I am building the Circulator. This is my first PedalPCB build so far. I have tested it and I am not able to see the rate with the LED. When I look on the forum it seems that it used to have this function, but I can not find the old schematic. I am very new to building pedals. I believe the from...

I believe it's Mark at mas-effects has put together a repository of effects and guide on how to load them on an eeprom. Repository: https://mstratman.github.io/fv1-programs/ Guide: https://github.com/mstratman/fv1-pedal-platform/blob/master/README.md Hope that helps.