Search results

Thanks CDB! Unbelievably valuable asset here Does this wiring look right to you?

Hey I'm reading thought this, and I think i'm stupid lol. I can never wrap my head around switch wiring when adding to a preexisting board. I'm wanting to to add the tight and FAT switch. For the tight do i keep R18 in the slot the and run wires to the switch or is there a way to keep it empty...

Oh for sure. If only it was that easy. Also if anyone isn't aware there's a great list of pedals that invert phase. Not sure how often it's updated though. https://www.thegearpage.net/board/index.php?threads/list-the-pedals-that-invert-phase.796444/

1. Ya you're right you can flip the phase. So i'd either need to add the phase flip or just make sure the 2 pedals i pick don't invert the phase? 2. So beyond them just having a bunch of w-taper am I on the right page about the mid point being 50/50 you think? I know w-tapers aren't SUPER...

If you look at the schematic for the punkifier it has a Buffer -> Split into 2 circuits -> Combined through a W-Taper ->Output buffer -> Rest of the circuit I'm obsessed using my OBNE Signal Blender. Plus the punkifier is a great underrated circuit. I would love to make a pedal where I combine...

Have you double checked the values of your capacitors? When i had a similar issues (different delay pedal, but only got a single delay) it was that one of my caps was the wrong value.

I just saw a thread where Robert said to make sure to turn the switch fully CCW before putting in the limiting washer. I'm wondering if I did that and if that would have caused this

It only happens on rotary positions 1-3. So i figured that the schematic might help narrow down what is going on. Only weird interaction is if i turn the pedal on when on the bad settings, then switch to the "working ones" it keeps oscillating/whining. If i turn on the pedal on any other...

Transistors are the fuzz side, op-amp is the OD. If my memory serves me correctly is a modified and juiced up DOD 250 (maybe Distortion+)

Alrighty to the breadboard then

ps i hate how annoying W tapers are to find

Hey Chuck! What would you mind sharing the wiring for a stompswitch in series? I've only done something like this with a momentary switch by bridging 2 lugs with it. I definitely love the idea of a stomp to crank the fuzz to 100% or maybe even a preset percentage based on what you set with a...

You shut you damn mouth 😤

For those that don't know apparently "HM2’s are designed to run on a Boss ACA Power Supply (12v instead of 9v) & so if you don’t use the right supply, they can sound pretty starved. The easiest way to get around this it to wither daisy chain it with another Boss pedal that IS standard 9v DC (PSA...

Just for an example for me, 1N60P says 240mV at 1 mA and 650mA at 30mA-200mA. So is in between those a good number to use to compare? Or would you use the higher number, since dirt pedals are ~100mA?

Thanks Robert! Dig the new profile pic. Does pin 3 of Volume really go to VREF instead of ground? Never seen that before

Do we have the schematic anywhere? I'm looking to lower the minimum gain of the pedal, since even with the gain at 0 it it breaks up a bit. Would love to be able to just reference the schematic before I try tracing and finding what resistors are in the feedback loop. Thanks!

I built the Reccurring Nightmare (Echo Dream) from FuzzDog. The modulation isn't working. I read that the 2206CP needs something like 12V to work. So I measured the charge volt pins Pin 1: 9.8v Pin 2: 5v Pin 3: 0v Pin 4: 133.6 mv Pin 5: 344.8 mv Pin 6: 5v Pin 7: 6.5v Pin 8: 9.8v I may be...

Thanks Robert!

Hey Robert, do you have the drill template for the new "Handy Expression Controllers"? It's obv not too tricky, but just want to make sure the jack is at the right height. I've searched the forums and can't seem to find it. Thanks!