Search results

  1. S

    Byzantium Flanger works for approximately 30 seconds each time I plug the power in.

    Ok I’m going to check again to see if I have a wrong resistor value.
  2. S

    Byzantium Flanger

    Dude I am currently troubleshooting my Byzantium Flanger and I was looking at your build. I noticed that you have a 47k resistor for R37, but the parts list and silkscreen call for a 4k7 resistor for R37. Was this an intentional modification?
  3. S

    Byzantium Flanger works for approximately 30 seconds each time I plug the power in.

    I just checked the voltage at each pin on the 4558s. I got the following on both: 1. -4.37 2. -4.37 3. -4.37 4. 0 5. -8.86 6. -4.37 7. -4.37 8. -4.37 Do those values seem correct?
  4. S

    Byzantium Flanger works for approximately 30 seconds each time I plug the power in.

    Could this be caused by having the wrong value for a resistor?
  5. S

    Byzantium Flanger works for approximately 30 seconds each time I plug the power in.

    Ok there are the pictures of the board ^. You can see that the female headers have extra sockets, but I used tweezers to remove the connector bits (essentially turning a 4 pin or 3 pin header into a 2 pin header). Also, I have two capacitors running in parallel to get the value I needed.
  6. S

    Byzantium Flanger works for approximately 30 seconds each time I plug the power in.

    Yeah, it’s weird. The pedal works fine for approximately 30 seconds each time I unplug and plug the power back in, and then after 30 seconds it seems like the LFO stops oscillating. Any ideas?
  7. S

    How do I use my multimeter (it has hz setting) to measure the clock frequency on the Byzantium Flanger?

    I understand that I am supposed to set the clock to 40khz using TP1. But, how do I actually measure it? Put the black probe on ground and the red probe on the test point? Both on test point? Pity me for being so ignorant.
  8. S

    How would I go about omitting the effects loop on the Aion Spectron?

    https://aionfx.com/app/files/docs/spectron_documentation.pdf Would I just jumper the pads? Thanks!
  9. S

    NSL-19M51 ROHA noncompliant/contains lead?

    Hi all! I am working on a build that calls for some NSL-19M51 photoresistors. Apparently these are not ROHS compliant and contain lead. Can somebody explain what this actually means in terms of health? Is the lead somewhere inside the encapsulation where I won’t be touching/interacting with...
  10. S

    Viibrato ATTINY

    Woah! That would be awesome. Let me go through my trash first to see if I threw it away. Also, maybe you could just ship it with my next order, which I plan to make today! Thank you!!
  11. S

    Viibrato ATTINY

    Hi all, I got my Viibrato PCB in the mail recently, and I don’t think I received the ATTINY microcontroller. It’s possible that I threw it away with the envelope. Would I be able to buy an ATTINY on mouser? Or is it a chip that has to be programmed first? Thanks!
  12. S

    SOLVED Cepheid Chorus problems

    IT WORKS!!!! THANK YOU!!!!
  13. S

    SOLVED XC Phase not phasing

    HAHA IT WORKS NOW!! IT WORKS!! It sounds glorious!!!! You guys are awesome.
  14. S

    SOLVED XC Phase not phasing

    Ok so another member just pointed out on one of my other builds that I had done some 10k resistors instead of 1M. I just noticed I made the same mistake on this build. I am going to fix it when I get home and see what happens.
  15. S

    SOLVED Cepheid Chorus problems

    Oh my gosh you’re right!! I wonder if I made the same mistake on my XC phase!! Thanks so much for pointing this out! I can’t wait to get home to try to fix it.
  16. S

    SOLVED Cepheid Chorus problems

    Hi everyone, I was a little hesitant to post this considering how much of everyone’s time I’ve taken on my other post about my XC Phase, but here I am again. I just finished a Cepheid Chorus build and it doesn’t seem to be working correctly. Even with the rate turned all the way down, the LFO...
  17. S

    SOLVED XC Phase not phasing

    Welp, I guess I am now on the hunt for a new matched quad!
  18. S

    SOLVED XC Phase not phasing

    Yes I just now desoldered all of the ICs and put in sockets and then new ICs. Still getting the exact same result. :/
  19. S

    SOLVED XC Phase not phasing

    This is the only time I have ever not used sockets. I ran out of sockets and didn’t want to wait for new ones to arrive. Lesson learned! I definitely bought some of the TL072s that I have from Amazon. I pretty much expect them to be bogus but they’ve worked in other builds. Ok, when I get...
Back
Top