Search results

+1 on the Nova. I use the smaller sibling of the Nova Delay, the Nova Repeater. It’s stripped down a bit, but has all the features you need, including tap tempo. If you want a diy, the Electric Druid Digidelay. Simple digital delay that can do up to 4sec max delay and has tap tempo. Note to the...

Curse you Sir!

Sort of what I would be doing at this point since putting a DI/XLR directly in the L5 (or any pre/dirt/whatever) and direct to FOH, would not sound great w/o a cab sim. So now it’s become, how do I add an XLR to the Unicab.

Electric Druid FilterFX with an expression pedal can get you most of the way there

That was in response to DailyDovetails mention of using a mixer with line/instrument level

The loop is after the pre, before the reverb and master. I run my nova delay and arachnid in the loop and my VB2, boost, BD2, and cosmopolitan before the pre. I run the gain around 11 and master at 12, compression between 9-11 depending on guitar. If I were to insert the L5 into the effects loop...

It has been a little hard finding info on the exact nature of the line out on this thing online. I may consult the man himself. All I know is it sounds good and gives me the connection I need. To be honest, I am new to this whole ampless setup and the sound folks are all volunteers and know only...

Good call on the effects loop. I’m not sure how hot the signal out of that XLR is. At this point, I have put so much thought into the idea of adding an XLR to the Unicab it’s going to happen just to say I can🤣.

I ended up buying a Superblock UK and am running it straight to FOH via the XLR. It works really well and I am pretty happy with it, but what kind of guitar player would I be if I was actually 100% content😵‍💫. I’ve built several different pre pedals and would just like to have the option to put...

@darwin999 thanks for all the info. I think when I was looking at doing just a standalone di box I ended up ordering a that1646, but got lost in the weeds and ended up buying a quilter amp that had an xlr out. I’m thinking it out a little more, I would still need some sort of cab sim after the...

For the name alone…. There is also a 5w version

Happy birthday Mr Wizard! Once the raging CDB bday extravaganza is over, will there be some movement towards developing this sweet sweet circuit? Purty please!

Good deal and rock out with your new tone machine! Mark this thread as SOLVED!

Done the blues jr route and get the “meh” reaction to it. It was nice, but nothing exceptional. Also had a deluxe for a hot minute and it was way too loud. If you can find one of the Fender Champ 600 reissues with a speaker cloth and speaker upgrade they are a great little option (very similar...

So I got caught up in the Aoin fx sale frenzy and ordered the L5 pre Board. I had been looking at it for a while, but never pulled the trigger because of the lack of a balanced out. Well that and the $16 converter, but why let a little thing like money get in the way…. I know I had asked before...

I would start by verifying all the component values in the lfo section which appears to be everything on the right of the lower board and a few components near that right header on the upper board. You can reference the full Electrovibe schematic to get an idea of what constitutes the LFO...

Not a new build but I took this out of a combo build using an acetylene as a pre and it’s just been sitting there begging to be boxed and used so here you go…… The power Jack got a little off center, but it doesn’t make me go into a white knuckle, eye twitching rage at its abhorrence and...

That op07 looks a little sus. With the chip removed what do you get voltage wise? Mine shows 8 ish on pin 7 and 4 on pin 3. As @Erik S suggested, validate R10/12/13 which are in the power section and handle VC and other supply voltages. I will say that mine shows 8.9 on pin 8 where the MB docs...

The biggest gotcha I had with this board was the headers. You can check my build report for a run down of my header woes

The calypso build doc didn’t go into that much detail concerning the specs of the LED so I used the ones from Tayda with very good results. You will adjust the overall brightness of the LED with the trim1 on the lower board