Search results

We can't all build every bullshit ass dirt box that Robert offers 😂

I use the tip of an xacto knife to get the film started

Ok for the 38.3k I used a 33k + 4.7k + 220R and for the 51k I used a 47k + 3.9k

I feel you. I built 2 all of last year, and this is my only one so far this year. It's possible it'll be my only one

I had never tented 3 resistors before this but it was better than some expensive order

I agree. Here's a cassette with the same design and some worn corners

I assembled the PCB in January and just got around to finishing the enclosure. I'm not a fan of the offset footswitch but what are ya gonna do. I made some rookie mistakes on this one from not having built many pedals lately. My text is a little too close to the pots so I had to use smaller...

Hell yeah

What sensible advice

You have my full and undivided attention. And that name is perfect

Ok first of all, don't get discouraged. This is a perfect learning opportunity and we've all borked some stuff. Guitar signal present in bypass usually indicates a problem on the main board (or with the wiring) if you've got your in and out jacks backwards, you'll still get your guitar signal in...

I'm just looking at a glance while making dinner, but nothing obvious is jumping out at me. Are your lower 2 pots insulated? Also if you still have the first 2 botched builds, those are a perfect playground for practicing your desoldering. It can only get better, and it's practice that's gonna...

That link will hold your hand the whole way through breadboarding a silicon fuzz face with too many pictures

This is what you want https://diy.smallbearelec.com/HowTos/BreadboardSiFF/BreadboardSiFF.htm

IDGAF if I never order from tayda again, but this is troubling me at the mo. It's the equivalent of 3 rubber bands in an envelope

What the heck even is that? It looks awful

It's heaped up with other crap but here it is. The lowest section has a door that slides out and folds down. and I've got a cover for the top drawer that clicks into place when the top lid is closed. Planning to clean up this space this summer maybe

I've got a bottom unit for mine too. I'll send you a picture tomorrow. I'm it going out there now

Yoooooooooooo Also I have that same Kennedy tool chest on top