Search results

I broke down and bought one a week or two ago...

No. And not sure we ever will 🤣 But I wouldn't be surprised.

Or can with have both by putting 1-2 caps on a switch?

Clean the boards. Oil from you skin will burn on the pad. Check your solder temps vs the datasheet for your solder. You may be burning the flux before it completes it's mission. Consider a different tip. Itlf it's a larger hoof tip, you may not be reaching the pad well. Try something like a...

How about winamp style screensavers that respond to your playing?

Can it DOOM?

#lifegoals

Excellent work. I thought that was your belly in the second pic.

Also, I'm a card carrying member of the Brassmaster Fanboi Club. It's a lot of fun. Preamp and/or compressor maybe. Where's @Feral Feline ?

Compressor, fuzz, chorus/ slower flanger/phaser It's kinda genre dependant but I think compressor, as unsexy as it is, is pretty universal. Any idea of what genres they gravitate towards? Another unsexy rec, EQ. Maybe the drebbel?

Govdeals.com

Hard to tell but IC1 legs look off. Also, make sure you didn't mix up nF and uF with all those MLCCs

I use my grandfather's drafting chair that he had at his workbench Not dissimilar to this one https://ebay.us/m/fDmVSJ Edit to add. It's likely from to 60a or 70s and built like a tank. The footring is nice as I can go from sitting to an elevated standing position on it to reach to to shelf of...

Punch a bunch into consecutive rows of the breadboard Then move dupont jumpers to measure each one. That will give them enough time. It all depends on how you handle them and how long. Also, don't measure them in a cold basement/hot shed.

I share this hot take. As long as you straighten the legs of the IC enough, leaf sockets are quite easy to use. I'm more inclined to just solder ics at this point

Just get a drill press on temu. It will show up 1/4 sized.

Here I was thinking it was the new immigration policy.

This is likely a combination of low harmonics creating "undertones". It happens on most plucked or hammered stringed instruments, particularly with intervals. It's possible that it's being exaggerated by the compressor, bringing the low level signal higher, high level lower. It is from...

Few alternate 1, replace the gain pot with a linear pot 2. Replace R10 with a 500k and switch another 500k in parallel. A "MORE" switch. It may be worth upping the wattage rating to the next class of the non-swo5ched resistor. 3. Mess with the jfet input buffer?

This just in