Search results

I hadn't heard of that as a possible fix for switch pop, I'll keep that in mind (y)

The Death Drive seems to be a FuzzDog PCB, which would be helpful to mention. But it's the same as other Life pedal clipping options it seems, one side is symmetrical, one side is asymmetrical (so one side of the waveform is clipped differently than the other), and middle is no clipping. As for...

It does sound a little bit sputtery to me, but I assume yours is even worse? A couple demos I checked: Nothing looks wrong from what I could see, but I only checked R4-5, R10-11 and R15-16, all the orientations and easy stuff like that. Soldering looks great, so my money is on a bad...

I'm not normally a huge fan of the hammered finishes, but the purple one looks great.

"The Chupacabra takes it's tonal inspiration by the biggest little band from Texas." is a bit of a stretch since it's just a Red Llama... That's what I don't like about their marketing. Although to be fair, it isn't as bad as I remembered now browsing the website, and if a component or two are...

Were there similar multi-Muff or TS pedals available before JHS? Sure could have been, I just don't know about them.

I was under the impression that pretty much all Mythos circuits are just other circuits with a new name slapped on it? At least JHS does pedals that weren't done before them, sure the TS/Muff multipedals aren't original as such, but those weren't available before. Or the mixer/tape deck style...

Isn't that more or less in the Xvive specs? https://eadn-wc04-3257698.nxedge.io/audio/wp-content/uploads/sites/2/2021/11/Xvive-5C10-Data-Sheet.pdf I guess the Off resistance is much more than 400k resistance it says, but I don't think 400k or 20M makes much difference in our common use?

I'm sure @Robert can give you the real answers, but I found this https://docs.pedalpcb.com/project/AwfulWaffle.pdf which at least shows the wiring diagram, which was the confusing part to me. The board is shaped differently too and I think some of the components might be moved around, so there...

But it clearly failed, I can clearly see that's a 5. The real trick is to paint 1, 2 and 3 on the other capacitors to make you wonder what happened to 4. That will drive anyone trying to trace it mad, and my secret is safe!

I haven't burned any FV-1's yet, but the feeling right as I had put a trimmer in place of a CLR to control LED brightness, turned it, and the LED went bright, then off and started smoking a little is priceless.

If necessary, you could drill a hole in the bottom and put some sort of a plug on it, so you could stick a screwdriver through to adjust it. Still not ideal, of course, and hard to see a world where you need to tweak it enough to warrant a hole but not enough to put the pot on the side or...

Remember to check your input and output jacks to verify you've wired the ground and hot wires correctly, that's the one that still gets me from time to time.

You didn't answer my question about the wires touching each other after they've gone through the breakout board? I doubt it's the breakout board itself, but I have resolved weird issues like that by wiring directly too, there could be bridges or something. You could check that connectivity...

The wires going to the footswitch seem kinda long and untrimmed on the other side, did you fix that after the pic or could they be making contact there? Are the pots insulated from the PCB? I can only see one having insulation, could the others be shorting components? Like Bricksnbeatles said...

Yep, straight to explosion. As far as I can tell, it will probably be just fine for silicon transistors. There might be some small differences, but you don't strictly speaking need to aim for the exact same HFE values either, you could go for what you like the best. Sockets work well for that...

The ducking is on a control, so you can just turn that off and it's a normal spring reverb, too. But if you use it subtly it can help improve legibility, while the reverb still sounds just as big. If you're in the EU I can ship you a PCB or two, I've got spares, but probably not worthwhile...

Yeah I thought about adding that there could also be some possible downsides, but I'm just guessing my way around electronics to be honest, so it's good to hear from someone more experienced that at the very least it's probably not a good idea to start blindly grounding all outputs for pedals I...

I don't think having the output hanging makes much of a difference since the input is grounded anyway. But maybe there could be some edge case where grounding the output might also be slightly better?

There's always the https://scientificguitarist.wixsite.com/home/disappearing-act, although "easily swap in different tanks" only works if you pick tanks of the correct impedance - although I think that restriction applies for other options too. I am confused as to why this is not talked about...