Search results

Does it work in bypass? The switch isn’t in the picture, is it OK?

That’s been my experience also. It’s similar to a distortion knob: I usually crank it up and think it sounds great. After a while, I figure out that it sounds better rolled down a bit. I don’t have a fast connection between my ear and my brain (I think my ear is good, but my brain is bad...

You can see it in the schematic. GE, 4148, 4148 with LED, and none:

I like the clean look, with the clear and the red. (y)

The Optimus Prime color scheme is pretty awesome! I’m tagging red pedal with blue knobs for a future build. Excellent work.

Looking at the build docs, the awful waffle switch wiring is different than most Pedalpcb boards. Watch out when you solder the foot switch.

Why are the IN, OUT, and GND pads empty? edit: And where do the 6 black wires go?

That was fast! It takes me 2-6 months to build a pedal. It seems the common theme in all of the reviews is: The sound keeps its tone quality and does not get thin or tinny or fizzy when you raise the gain or activate the boost. I don't have any other pedals that match it. It's difficult to...

I double checked, it is the Lawn Green from Tayda

Like any other program, it took a few tries to figure out. The only gotcha that I ran into was a layer that came out the wrong size. I never figured out why it kept resetting to the wrong size. I ended up starting a new file from scratch without any issues. Once the artwork is done in...

I’m definitely behind the curve. I still don’t have a chorus.

I did, but I won them in a contest. I'm only seeing them on ebay now

The circuit diagrams look quite different, but I haven't built a Viceroy. Your comment caused me to read this thread, and now I want to build one: https://forum.pedalpcb.com/threads/monarch.5066/

I would bump it up, you will not be disappointed. I think I got the 3130 from Tayda. “Mojojito, the juice is worth the squeeze”

I finally got around to finishing this one, and all I can say is the Mojo is real. The sound stays full and warm as you raise the gain. The boost is really good. It seems integrated like it’s supposed to be there, as opposed to an afterthought. It goes from booster to warm OD to Dopesmoker...

I would still be stuck on step 1: Are there any bridges where there should not be a bridge? Either untidy solder or a loose strand of wire? It’s difficult to verify from the picture that there is no bridge between the solder pads of IN and Ground, OUT and Ground, + and -. Is the foot switch...

I know I’ll never sling the Posca pens like our friend @jjjimi84, but I can’t stop laughing at this pedal. Not much to add about the build that hasn’t been said in other threads. Went together smoothly. I did use the optional LEDs

How did you create the artwork? I like the wishy-washy comment. It took me a long time to figure out how to not stress myself out. I switched mine externally, but pretty much leave it open. So a dip would have been a good choice for me too.

Why’s the blue rail connected to the red rail at bottom? Never mind, you figured it out. Good job (y)