Search results

Thanks! https://ninjatransfers.com/products/uv-dtf-stickers-decals-by-size

Had to do it. This is a very clever idea. Very easy build. I went with the Green Russian and Triangle since I thought that might be some good differences. That's the one issue with most Muffs, is that they are not super drastic from one another. These 2 are just enough to tell the difference...

Also, I feel the new Marshall pedals just released are quite good. Especially the PPCB Article 59 Overdrive and PPCB Eight Ball Overdrive. They certainly do the Plexi thing. I will also echo others and say the Golden Falk Overdrive is really good. My favorite MIAB.

Yep, it would be the BAT41's. Although, I can't imagine it making that much of a difference since the BAT41's are usually used to emulate Ge diodes. The marketing is super vague though. Either way I would just recommend installing some sockets then trying different diodes. Edit: Circuit looks...

I did not use long leg pots or cut the bezel. I seem to remember it was a bit tight but Im pretty sure wasnt too bad.

Yep.

Thanks so much for the clarification. This is exactly what I was looking for.

Thanks for the response. I'm still having a tough time wrapping my head around. Could I take a wire from G1 to one of the lugs on the SPST and the other lug to ground?

I think so.... Is that fully removing the diodes (octave) from the circuit? And from that, looks like it's break connection on the anode side of the diode?

So, im trying to figure out how to add the diode lift switch to this Octavia vero layout, Ala Fulltone Octafuzz. Can I leave the diodes on the board or should I take them offboard? Looks like the cathode of both diodes are going to lug 3 of the volume pot. Just unsure of how to wire the switch...

Perfect, thank you sir.

@Robert since no docs up yet, is there a current drill template I can use for the Double Muffin? Does the Dream Fuzz work for it?

Hella clean build dude. Those 3PDT switches are textbook solder job.

PedalPCB did release some killer boards this year. This is my top 5 PPCB of boards released in 2025 that I've built. (In no order) 5. Eight Ball Overdrive. I think Marshall did a nice job with their latest offering of emulation pedals. I really liked the Eight Ball and the Article 59. Did not...

2025 was again a productive build year for me. I've had a lot a fun building with stripboard so here's my top 5 stripboard builds. *In no order *most are bare enclosures for now but will be painting and decal'ed in warmer weather months. So, just gut shots. Not pretty but all work perfect. 5...

Hell yeah man. True DIY here. Great build

You probably could be able to fit everything in the BB2 if you lay the electrolytics down. Some you can even install on the underside. It won't be as easy but should work. The light box is pretty high so you may be able to get away with removing the top and even putting tape over it. This is the...

This is the Maniac Flanger based off the MXR M117. This is my 3rd Schu-Tone tone and once again @dan.schumaker knocked it out of the park. Sometimes stacked boards can be intimidating but this went super easy. Great layout to fit everything with 1/4 watt resistors. It was tight but all fit...

Worked like a charm. Just ommited D5 and connected the anode of the bicolor LED to the + on D4 pad. Ran the cathodes to the footswitch. Ground of D4 to ground on footswitch. Just needed to jumper the SW1 pads on the board and we are off and running. Used a trimpot for the overall LED brightness...