Search results

Walrus charging $200 US for what is essentially a bazz fuzz circuit..

Heyo!! any leads on the proper bulb and LDR for this I'm looking at these two from Digikey and wondering if they'll do the job! https://www.digikey.ca/en/products/detail/advanced-photonix/PDV-P9203/480628 https://www.digikey.ca/en/products/detail/visual-communications-company-vcc/7371/43471

File in Affinity looked all good to me!!

ohh this is great!! In my case the colors have shown the way I've wanted (I'm a photographer so I work on calibrated monitors), but I just may use one of these spot colors on my next go! As for the bleed.. I took a look over my files and realized that for the white layer, I added a stroke to the...

feel free to reach out if you'd like some help!! I can take a look at your file!

What I find so odd is that it's so hit/miss. I have fairly simple designs, but all mine have been perfectly printed and made in Affinity.. I really feel like my issue is from dealing with a difficult enclosure color and in my first attempt, not correctly importing and applying the RDG swatch...

The brighter red one, barely looks like a bison.. it's pretty blobby lol.. the first two look pretty good.. Are you using Affinity, or Illustrator? About a quarter way down this page you'll see the link to download the Roland VersaWorks swatch. You'll have to import it to your program. To note...

Thanks. I have 4 other pedals I've successfully printed w Tayda. I fudged the properly adding the RDG swatch on the left one. The other two are correctly done. I'm basically looking to have the buffalo on the left one, with the whites and sharpness of the letters on the other two.. I'm unsure if...

Yup.. as I said, I put white under the right buffalo, and it didn't get that 'bleed' like the left one. 3 of my other pedals are on black, 1 is on white, so those were easy to do, even w colors! I might have to get a trial of Illustrator and take a peek, just not stoked on $30/month for it!

I should note that I'm using affinity. I did drop in the pantone color for the swatch on the last two attempts (first attempt I think I screenshotted one of yours you posted and tried to get it as close as I could haha!) I have a feeling that white bleed on the first one was some issue with...

Been fighting with getting the graphics to print the way I'd like.. Left: First attempt. My whites weren't properly white and letters came out unsharp. I initially didn't like the white under the buffalo (now I do!) Didn't like my logo being so dark either. Center: Second go. chose to not put...

Hi everyone!! So after previous successful prints at Tayda, I've been told my latest batch won't print and don't have 'the proper RDG swatches' even including the exact same files I've previously printed.. Would any of you be kind enough to take a peek at my files in Affinity and see what's...

JAZZ III XL

How do we get this dot? I used to have it in my AD and now it's not there!!

Lol.. I have the dumb.. It's working now thanks!!

Should preface by saying I've built a few of these and they all worked right out the gate. This one I'm getting sound up to R8 and Pin 5 of IC1. Tried 2 different TL072 and same issue. IC3 gets incredibly hot right away. I get some signal on both Pin 1 of the dual gang gain pot.

Thanks! not planning on it! Just doing other troubleshooting and noticed the 18V on schematic..

Can't see anywhere in the documentation..but can you run a Kliche off 18V? There's a spot in the schematic showing D4 and D5 hitting 18v

Amazing.. For my Army Green enclosure I had to take a screen cap of a post in this thread and use an eyedropper tool on it to get somewhat the right color :P

My First 3 from Tayda!! On the buffalo one, the white wasn't intended to show below the buffalo. Some people on another forum liked it that way, but I'm doing to do another go and not add the buffalo to the 'white' layer.. I'll probably lighten up the color of it as well.. As for the other 2...