Search results

Yet Another Analog Delay Only components that differ from the doc is R45- I went with 24k, and I used an NE571 FX loop is inserted between Lug 2 of the FDBK pot and the board BLST shorts lug 2 & 3 of the FDBK pot, and puts a 10k in parallel with R45 Spent about an hour troubleshooting this...

Are you consolidating all the ring mod requests to give us the ultimate in dissonant bells and angry Daleks? (Also, deleting all the YATS requests? 👉🏻👈🏻)

Been waiting on this, too

Cosette ready to inspect the most recent parts haul

I was gonna place an order for 20 125Bs and the pots I posted in the mailbox thread yesterday. Shipping and orange fuck tax would have been $124 Previously, this would've been around $30. I can source the Hammond powder coated 1590N1s, but the cheapest I've found is about $13 a pop As for...

Pots, footystompers, some sweets, and a tape

Swapped out the fuzz pot after looking everything over. Still distorting CCW So, I thought maybe overdriving the input of my preamp... Nope. Here's a gutshot to see if any values are off that I missed. Barring that, I'll try some different chips tomorrow

That's what I thought too, when recalling the last one I built. I'll take a look when I get a chance

Until the end of the longer video, when I add the Rat, yes. It's pretty dirty as is

I didn't have any 2n3392, so I grabbed the first transistors I found in my stash with the same pin out. Those happened to be 2SC1815s. R4 & R8 reduced to 270r to push the input and output a hair more. 1.5k added between lug 1 of the Sens pot so it doesn't bottom out Big, nasty, clangy. Build it

Built to the doc, except I replaced the diodes in the envelope detector portion with BAT46, reduced the Sens / Sweep pot to 5k w/ 4.6k from lug 1 to ground, and added a 50kB in parallel with R34 & R35. This effects the response of one of the formant filters, and is highly interactive with the...

Built to the doc, a except I added a 1MA pot in series with R23, and an on/off/on switch tied to lugs 1&3 of said gain pot. The throws select between a pair 1N41418, and a mismatched white led / 1N4148. I increased C3 & C4 to 22n as suggested in the doc. Master volume trimpot made external. Ton...

Bean's layouts are almost always cool

Had to dig to find stuff I have everything on hand for 🤣 Luckily I have a shit ton of 2SC1815 as I'm out of 2N3392 for the BoomBoom I'll need to decide if I wanna us LM13700 / NE5571 or my last handful of 3080s on the Honeydrippers

Populated another board I need to order pots and chips for 🫩. Apparently, I'd purchased the MN3205s instead of the needed 3005s 🤣 Andy giving his new guitar a test drive before final setup. In this vid, I set it up to the specs of my guitars, but his playing style is much different than mine

I think this is the one. With the Muzzle, I was planning on keeping the MXR in the chain as the Muzzle didn't really quash the single coil hum, but with the G8 I don't think I'll need to Here's a quickie with a Rat in the loop, and controls set to 50% Sustain is a bit fiddly, so I'll...

Hopefully the last in my quest for a noise gate

I've had my oldest Couch strap (gifted from my now-ex-wife) for almost twenty years. Except for the accumulated grime, it's as good as it was was brand new.

The power of gravity 🤣