Search results

Very fun and relatively easy build. I got hung up on the stereo jack wiring because I haven’t used them before. But after searching the forum, you all had the answer! I need to drill the holes for the LED plastic bezels a little smaller. I made them .2 larger for paint, but I think that was a...

https://www.guitarworld.com/features/bob-mould-pedalboard did you see this Bob Mould pedalboard article? Guess he dropped the MXR D+ but you know, I’m after that Hüsker Dü tone anyway ☺️

Thank you I absolutely needed to know this!

Thank you! Yeah I don’t have any cats but I imagine you need to keep them as far as possible from your workbench

I figured out the high-pitched sound and it was, luckly, just a bad patch cable. Odd it worked fine in bypass, but I'm glad there isn't a problem with either pedal :)

@Locrian99 to be fair, I’m a professional designer, so I don’t have any excuses when it comes to the graphics lol. It’s more of a “Chefs don’t want to cook when they get home” situation if anything. It’s mostly the top right knob, I named it regen but that might not have been the build doc name...

It’s good to hear the parts don’t make I big difference because I already populated my next 2 boards with the cheapest possible resistors 😅

@Alan Thank you! I’m not sure about the charge pump but I’ll look into it. Also thanks for the tip about LFO I’ll try some wiggling. And the wings (which I design as a magnetic field to be on theme lol) look raised because of the UV printing. There’s 2 white layers, color, and gloss. @spi...

Hi everyone👋 First build report here, first pedal from a pcb. I built a kit before this and thought I’d try buying a pcb and figuring it out! I had a little trouble with a short on the back of the pots because I didn’t buy dust covers, I think they were sold out, and another short on the ring...

Ok so this is marked as solved, but for anyone who comes across this issue in the future: The depth pot being all the way down was causing testing issues with the LED, but that wasn't the problem. There likely a short under one of the pots that was poking through the electrical tape (clipped...

I put electrical tape under the pots because I forgot to order dust covers, but I’ve got some in my next shipment!

It was the depth. I don’t know how I missed it but it was the depth. I feel embarrassed but also relieved 😅

Adding a couple more pictures. I just replaced R103, which seems to be the resistor before LED2 in the circuit. It had a little bit of blue film showing on the underside of the board, which made me suspicious that it was blocking the contact. It did not fix true problem unfortunately.

Attached picture from testing. It was a little strange how dim the green led was.

Hi all. I am new here and this is my first post. I built the magnetron delay and tested it using the auditorium platform. It worked in the test. However, I noticed the bottom LED was a little faint. I figured it was because I just stuck in LED in there to test, and the connection was a little...