Search results

Done 🤙

Not to throw a spanner in the works here but my Rev 7 is clear as a bell without the filter. It’s likely worth building it anyway for those that haven’t put theirs together yet

This was fixed, it was a broken 9V socket. The daisy seed can send power to the LEDs (I think?) so the IC wasn’t getting gas. Not sure if that’s what it was but replacing the socket worked

PSA: this was solved, it was a broken 9V power socket. I didn’t pick up on it because it Daisy Seed with fall back on USB power and can still trigger the LEDs even without 9V input, so I had working LEDs but not a working IC

Hey mate, the build is the Terrarium This is from Tayda, the op amp is a TL072IP and stamp is 28A11GM

I'm probing this op amp Pin 3 is a clear signal Pin 1 however is glitched and horrific, this is the sound i basically get from the other end of the pedal (once it passes thorugh) This op amp is cooked right?

yeah I did see your problem, I was going to do the filter if it actually worked. We have the same version and revision. I haven’t fried it as far as I can tell, everything else seems to work just fine (controlling switches and LEDs etc), so not sure if we’d see this symptom if it was cooked...

@Robert im keen to eliminate the Terrarium from this equation. Listening to these two recordings, doesn’t sound feasible that the problem exists on the terrarium? I’ve checked the op amp is securely in the right orientation...

I've built the Terrarium, and managed to get the Blink example working, environment all set up (this part isn't alien to me, i am a dev by trade). I've also managed to control the LEDs with switches correctly and all seems to work okay in that area. You'll see it in the below script. However...

I think I've wired them up wrong by assuming the tip lugs were both the signal, I can't read this datasheet though

Thanks, so I can understand and learn, can you explain why, are they all voltage splitters?

There's four of them in this circuit, https://docs.pedalpcb.com/project/StoneAgeDistortion-PedalPCB.pdf How much difference do you think that would make?

I soldered them into the board before noticing that the header pins don’t fit. This’ll have to do!

Hey man, it looks like you’re the closest to finding a Vero layout on the internet for an AMZ pickup simulator (congrats? 🏆) I was wondering if you could spare a moment to draw one up for me. Happy to flick you some money for your time. If you have any closer photos of this Vero to help me...

Hey man, so I've reached this step. I've made Q2 and Q3 equal 4V. Question here, is something like 4.04-4.06 kind of values okay? My main question is about Q1 though. You mentioned that biasing 5V for Q1 is preferable to setting 2K on the trimpot. I've tried both and they are very different...

Hey everyone, I'm about to attempt to build a Benson Preamp with veroboard using SMD J201s. Their docs call for the builder to bias it as per PedalPCB instructions. However I notice that the veroboard was designed and uploaded months before PedalPCB released a new revision. I guess my...

The problem I have is that I have a wireless system as first in my chain, it has a buffer in it so I can't get passed that. I do have a green russian big muff that sounds great in my chain, but I just built a Foxx Tone Machine which has 1N34A in them so I don't know how that's going to go, the...

Just wanted to say I've added some DOM level lazy loading and the site should run much faster for you.

Finely tuned target marketing 🔥

That’s fair, I’ll address what you’ve encountered below but feedback on these kinds of things is the way they improve so firstly: thank you! I hope you take the time to read my response. Currently the site loads all entries at once on first paint. It doesn’t leverage a database (working on it...