Search results

I'll wait for the Waza version....

I have been known to be a bad influence... Nice part of this is it has a camera and you can drag/drop on the actual object. I currently try to design all the graphics with knob placement etc and then drill. Sometimes the drilled holes wind up a tiny bit off. With this you could drill...

Surprised this wasn't already being discussed here; UV printer for home use around $2k. Not sure I can justify it for the few pedals I make a year but if other companies start jumping in the prices could come down. https://www.eufymake.com/products/eufymake-e1

How about this one: https://www.guitarcenter.com/Fender/JV-Modified-50s-Telecaster-Maple-Fingerboard-Electric-Guitar-White-Blonde-1500000365873.gc I think this hits most of your specs.

They can but there will things to learn. Designing layout/fonts/etc in software and then learning the 3d printing side. Lots of trial and error from my experience getting things to line up and look the way you want. Some of the newer multicolor capable printers like those from Bambu can make...

Making the plate in Tinkercad wasn't too bad. Thank you. Its one of those pedals that you don't notice as much until you play with it on for a bit and then turn it off.

Nice! I use Hueforge as well and your post made me think about merging Hueforge artwork onto other prints as well. Just did a 3d printed fix/enhancement on one of my builds: https://forum.pedalpcb.com/threads/skeptical-buffer-build.22197/

Took forever to complete this but after multiple parts orders, mis-drilled holes, and LED struggles I finally got this one wrapped up. First mistake was drilling the holes for the switches too high. Instead of using a different enclosure I made a 3D printed plate with transparent letters to...

Very nice! Did you do two separate prints and glue them?

Here is the decal artwork Cees designed for the Sonomatic.

Here is the build guide for the Dirtbag.

I sunk quite a few hours into it a while back. I enjoyed exploring and working through the dungeon levels but the constant running back and forth started to wear on me. If you like Stardew check out Graveyard Keeper.

My wife said it looks like Christmas...

Agreed.

Its been a while and I don't remember if I used one or just read the values off the PCB/from the image here: https://forum.pedalpcb.com/threads/missing-build-docs-schematics.3784/post-120253

Love the Cherry Pie I built, only thing missing is stereo.

I didn't realize this was what they were doing with a lot of the cheap Chinese necks until last week when I was looking at GuitarFetish for some parts. I noticed they had necks with "Roasted Maple" in quotes...

Shin-ei/Jax Hurricane Wah. Replaced all those old electrolytic caps and cleaned the pots. The caps were all reading double or more their original rating. Nice that they also include a schematic.

They are the same just a matter of preference or wire routing. Do you want an extra wire running to the 3 way or to the push/pull?

I could put your non working electrovibe next to mine and start a collection. Vibe channel has never worked and its on my list of things to get around to....