Search results

:ROFLMAO: I haven't been keeping track, but no way Pauleo is considering going down to one bike. Storage is the problem with bikes. I'd have a lot more silly old bikes if I had room for them. This one keeps catching my eye. Luckily it's just far enough away to keep me from doing it...

There. I fixed it for you.

Now I want a pedal with a pop-o-matic bubble.

Full Kennedy stack is hott. If the mower service center gets a glow up I expect updates.

Then the pizza delivery guy has to collect the tariffs... It would be a whole thing.

Just to be clear - I'm suggesting you experiment with getting more light to hit your LDR. The easiest way to do that is to point the light-sensing side of the LDR towards the LED. If you leave the leads long-ish you can have some adjustability in how you set the gap.

Resistors look good. I haven't built the moonshot, but on the Sproing Deluxe I found out there's a huge volume difference depending on how much light from the LED is hitting the LDR. The way you orient the parts has a big effect on that. Here's an example courtesy of @VanWhy of a more...

I don’t really do graphics or themes unfortunately. If I did, my childish sense of humor would steer me toward a butt plug theme, so it’s probably for the best.

Classic 7 drawer! Can’t beat it. I even made an attempt at re-felting that one.

That lettering came out great!

Oh yeah, tons of respect for the folks drilling rows of holes and fileing them into slots by hand, but I’m doing it the easy(ish) way with an old manual mill. For this little batch of c2ce stuff I set table stops to cut the longest slot, then spaced off the stops with a series of gauge blocks...

Guess I don’t have to do some more reading after all. That was faster than asking chatGPT! Thanks Nathan.

I’ve joined the cult! I don’t play much bass, but it sounds nice as a DI with my baritone. Keepin it DIY with some tricky drilling and Posca pens as usual. The lighting in my shop made the color look all screwy, but it’s regular Tayda cream with a matte clear coat. So far I’ve been running it...

ugly’d up my new strap buttons. Six hours in the pickle vapors and I ran out of patience.

What’s yer darkening protocol? I’m trying some right now inspired by some old @MichaelW posts.

I use this stuff, but it's mostly isopropyl, so I'm skeptical it's worth the extra cost vs just straight IPA. https://www.amazon.com/dp/B07XDCRLR6?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_5&th=1 I do prefer a condiment bottle over a spray bottle...

My only complaint about my recent guitar purchase has been that the strap buttons don’t fit in my clicky strap. I hardly ever play standing up, but I decided to make some new ones anyway. The buttons on my Epiphone LP fit nice, so I pulled one of those to copy it.

Is that a weld repair?

I saw a couple reviews that noted remarkably nice fretwork for a guitar this cheap. Fret ends are super smooth and polish seems nice, although being a used guitar I can’t say for sure whether it’s been worked on. I’ll do some setup work at some point (probably when it gets new strings), and...

I’ve spent a lot of my life working with VBA, and that’s one of the cooler things I’ve seen done with it. I try to avoid new hobby rabbit holes like learning FV1 programming so I don’t quite fit your cross section, but I would like a copy of that workbook. I’ll send you a DM.