Search results

I built Sabrotone's Lighthaus. Absolutely love it. I did not have the 2n1306 or 8 transistors which are germanuim. I can't remember where why or how I acquired the one's I did use which were 2n2369a. These are silicone. I know I never compared datasheets between the 1306 and 2369a would'nt know...

I have a pedal. It passes signal in by-pass it does not when engaged. It has a high pitched squeal that can be adjusted moving the pots (i.e. volume pot ,response pot etc. led's work as they should. but the squeal is pretty loud and always there. I suppose I should mention the build I'm asking...

The build docs call for TC1044scpa I have a 7660cpaz and although it powers up and passes signal there is a whine there and I did the 39k resistor and 10nf cap mod. Would using the 7660 be another possible cause for the whine?

Thanks for the quick response. I had reflowed the board once before but decided to do it again and although there is still a hum it was greatly reduced . Thanks again for the suggestions

I think I've got a vague idea for an answer to my question but hoping someone else could confirm or deny my thoughts So I built a Bad Monkey and I get a fairly loud hum when circuit is engaged so I try hunting down the source with audio tracing accidentally touched the output jack ground lug...

Fine people of the PedalPCB forum, I come once again asking for your time. I am having a bit of confusion with the wiring on this one Here is the link to the build docs https://drive.google.com/file/d/1UoN1kGc04fDdSNSP3lPHdxLoPjqy5LX_/view There are four 3pdt stomp switches, the drone and on...

Before I ask, I gots to say, I'm fully aware of how open ended , broad and general this question is , but I'm looking for basic generalized answers . For a kinda generalized troubleshooting thing I'd like to put together. From the ultra stupid (i.e "oh OK the center of vol pot goes to the out...

excel lente!! thanks for the qwik response

building schumann pll it calls for 4017n is this the same as cd4017be or 74HC4017N? or are the last 2 mentioned different chips I'm finding conflicting info and its the last chip I need to finish this thank you in advance

That Sounds Awesome Thank you

This response/post was an accident. And has nothing to do with nothing sorry about that

How first do you have to hit it you have to room Close to check on her Allen key and hit the Allen key to knock it lives did you research any of this yeah but it is still fucking screwed onto the motor so you gotta do not rocket league you got a new one another joke oh did you already get to...

I built Sabros absolutely brilliant Lighthaus (stripped down version of the Openhaus) Both pedals require 2 - 2n1306 Recently I decided to tackle the full on Openhaus finding it hard to get 2n1306 I decided to borrow the two I have in my Litehaus. 1st try was no go so troubleshooting began...

Anybody use a KOT to boost a high gain pedal? And how about Katzenkonig ,Ionosphere(something close to that) , Sonic Titan (just recently built and what an absolute killer pedal and incredibly loud). I think I'm gonna focus on the next few new builds being older circuits Just for the hell of...

Have you adjusted your trimmers? Until I did that I got the same thing. Also check that your switch has good contacts and continuity.

Does anyone know where I can buy genuine 2n1306's and don't cost $10 each? The place I got mine from like 5 years ago is no longer around. Gonna try for a Toneczar Openhaus. I built Sabro's Lighthaus ( a bit stripped down version of the Openhaus) which I really really really like. Figure the...

For me , trimmers are the only way to set bias it's way too difficult for me to ...1) remember an electrical formula or calculation 2) Even if I could remember one actually putting said formula into action is 100 times harder than number 1 (for me) I know that once you have the trimmer set where...

Cool I got a modded DS-1 and a stock 1 and a late model muff this is a combo I havent tried thank you

yeah I have one of those mini Ibanez screamer too that I've used maybe 2 times I wouldn't doubt the /Nux is some derivative of it but wayyyyyyyy better and so cheap that it wont hurt if you dont like it

If not a tubescreamer fan (Which I'm not a hater nor lover of) try a Nux green OD still really pretty cheap and for me kicks every pedal I've thrown at it up several notches super quiet and clean and nice sweep on the tone only the tight metal pedal refused to comply with it.But It enhances...