Search results

I didn't look very closely but it looks like the synchrowah uses 9mm pots? Maybe you need to use the kind that have a shaft that's knurled and has an indicator like this https://smallbear-electronics.mybigcommerce.com/9mm-pc-mount-panel-trimmer-tall-shaft-pot/

If you mount the jacks closer to the face of the pedal and use low profile electrolytics, the board can usually go "on top" of them. Here's a thread of my 1590a builds where you can see some examples, including an fv-1 with stacked boards

I should try building something I like next 🧐

@fydo please note the correction. I'm very tired. Up cuts more bass on the hi frequency switch

I also use 225°, 10 minutes for the first round and 20 for the second

Yeah, up position is high pass engaged. for the other switch, up is 200 and down is 750 I believe up is 750 and down is 200

Yeah I wish I had put 200hz and 750hz on their respective sides of the switch. It's easy enough to figure out which one is which but the label would have been nice

Honestly I think it was on the wishlist so long that when it became available I was like ok let's go. I don't regret building it but once again I'm like ho hum another pedal. The Reverb demo made it sound good

Ok I played this for almost an hour this morning. I like it and I don't. It's really fun but possibly not totally useful. Half of the gain range is not usable. I don't like that it gates really hard a little after halfway on the gain knob. I like the medium gain and cleanish sounds out of it...

We can't all build every bullshit ass dirt box that Robert offers 😂

I use the tip of an xacto knife to get the film started

Ok for the 38.3k I used a 33k + 4.7k + 220R and for the 51k I used a 47k + 3.9k

I feel you. I built 2 all of last year, and this is my only one so far this year. It's possible it'll be my only one

I had never tented 3 resistors before this but it was better than some expensive order

I agree. Here's a cassette with the same design and some worn corners

I assembled the PCB in January and just got around to finishing the enclosure. I'm not a fan of the offset footswitch but what are ya gonna do. I made some rookie mistakes on this one from not having built many pedals lately. My text is a little too close to the pots so I had to use smaller...

Hell yeah

What sensible advice

You have my full and undivided attention. And that name is perfect

Ok first of all, don't get discouraged. This is a perfect learning opportunity and we've all borked some stuff. Guitar signal present in bypass usually indicates a problem on the main board (or with the wiring) if you've got your in and out jacks backwards, you'll still get your guitar signal in...