Search results

  1. Coda

    SOLVED 1966 Maestro Fuzz-Tone

    I believe either side will work since they both are ground points. Where do you have the white wire from the battery connected? Also, double-check that the white wire from the lower-right gnd lug connects to the case of the attack pot… Check this out…...
  2. Coda

    SOLVED 1966 Maestro Fuzz-Tone

    I think that’s where the -9v was originally attached before the OP reattached it. The FZ-1a has an off switch built in to the volume control. OP, check out the lower right-hand corner of that board; it looks like that transistor casing could be touching something…
  3. Coda

    SOLVED 1966 Maestro Fuzz-Tone

    I want you to know that I want you to get this thing working. The FZ-1a is like my dream pedal. You are a lucky sun of a bytch, and I will do what I can to help. And if I can’t, maybe @Chuck D. Bones can help. He’s a good kid…
  4. Coda

    SOLVED 1966 Maestro Fuzz-Tone

    I wouldn’t go there yet. Double check that you have 1.5v from the battery. Visually check all values with the schematic…
  5. Coda

    SOLVED 1966 Maestro Fuzz-Tone

    Ok. Those do seem off. Usually it’s around .5/1/.7…
  6. Coda

    SOLVED 1966 Maestro Fuzz-Tone

    Are those the readings on the emitter?…
  7. Coda

    SOLVED 1966 Maestro Fuzz-Tone

    Can you check the transistor voltages?…
  8. Coda

    SOLVED 1966 Maestro Fuzz-Tone

    Can I have it? I’ll trade you a DS-1 that 100% works…
  9. Coda

    Favorite Rat Mods?

    About 1:00pm…
  10. Coda

    Favorite Rat Mods?

    What?…
  11. Coda

    Woodpecker fizz? Distortion? Input problem.

    So the fizz is audible even with the level set low? Sounds like your jfet might be too hot?…
  12. Coda

    ‘Thanks Giving’ sale

    You can get 50% of a build doc…
  13. Coda

    ‘Thanks Giving’ sale

    Oh well…at least there will be build docs, right Anakin?…
  14. Coda

    Issue with DOD 250

    Got any other 741's to try?...
  15. Coda

    Time to Blow: My First Tube Amp Project...

    Does anyone know if the StewMac kit is any good? I imagine it’s just the Mojotone kit. That may be a good option, combined with BF sales…
  16. Coda

    Time to Blow: My First Tube Amp Project...

    I want to build a 5F1 Tweed Champ. I want to do it as a replica, essentially. This will be my first tube build. I am not worried. I know how it is, building electronics, I know its high voltage, I get that. I am taking it 110% serious. I have been watching Lyle on Youtube for a while now and...
  17. Coda

    Median compressor

    FTM…
  18. Coda

    Ghordo fuzz (vanity fuzz face content)

    That enclosure makes those pots look smaller than SMD…
  19. Coda

    Truefire course recommendations?

    The Pat Martino one is a trip, but do t expect anything playable walking away. It’s like quantum theory…
  20. Coda

    SOLVED Sandspur fuzz - no sound, led and bypass work

    What are the readings on the collectors now? With the positive probe on the collector and the negative probe on a ground point (input/output jack)…
Back
Top