Search results

Sadly I'm of no help here, I never tried the mercurial. Yep, they are under because of space management ;)

I was not sure how I would mount the board at first and those were kind of tall. They fit well around the pots.

Build went really well, sat on the workbench for some months before I finally ordered an enclosure then another couple months to finish the wiring. It does what it does. I find it cuts a lot of volume but that may be how it works. Here it is, simple design, 1590B cream color with brown accents.

In the beginning of 2025, I decided it was time I built my first king of tone. While at it, why not build two of those. It’s not that it a complex build, but time started missing, then it was motivation. And I started moving things around and played with the jester mods. I don't like the knob...

Monarde is Bergamot or Bee Balm. The plant in the picture could also look like some kind of Thistle, but I think yes it is in fact Corn Flower (Centaurée).

My thought was for what we call "Monarde" in french. We have here at home some nice red double ones... not in flower yet. Tried some beer made of those once and it was good.

My vote goes for Parts Fuzz

I think those are ok, the board is just out and flipped.

And that frequency pot is all soldered now? second row of legs

Mine is also picky around the compressor section I think...

Silly question, but how do you power it ? Mine draws around 250ma.

I'd love to see Candy White

I removet it

It's the Rust-Oleum 2x spray cans from the hardware store. Purple and Clear

So yes, by the schematic the internal connection between pins 8-9 could be bad (if the jumper between 4 and 9 is good)

Well, now that I see it that way, I might have been totally wrong ! So yeah that invalidates a lot of what I said ... and that switch might really be bad.

@BrainDrain Edited : You are right ! 2 and 5 are for the signal to come in and out (of the switch). 3-6 jumper is where the signal is routed when bypassed. 1-4 are the signal going to and back from the circuit. SO, from the IN pad, the signal will go straight to pin 2 of the right side...

Same as @MichaelW here, I built one in a 1590BB and it was squealing like hell. Tried everything to get it to work and could never find the problem. It was my first build, so I could have missed something.

Edited since BrainDrain opened my mind : My guess, check the left side bypass. May be a problem of bad switch. Check continuity between pins 8 and 9 and jumper from 4 to 9. 2-3-5-6 when in bypass... they should all have continuity. Find if the problem is the 3-6 jumper or bad internal...

What is the size of your artwork in "mm" ? From your file information it's oversized at : For a 125B : artboard size 62 x 117mm Yours would be about : 258 x 487mm.