Search results

question.... did you add a pot in place of that 6k2 Resistor on the Squidward? if yes what value and taper? i guess the volue was just added a A100K at the output after R13 right?

Yeah i can find it locally

The little angel sounds nice.. perhaps adding some clipping for the gritty part and a fx loop footswitch for the noisy wildness and i think i can get something a little close to the jptr one Thanks for the heads up

I don't have the pedal myself, but i posted. A youtube demo, and there's plenty more sound examples online

I don't have it myself unfortunately But i was thinking to get it, an maybe post some fotos here for tracing it?

Any idea what could get me close to the sound of this pedal? I spot 2 pt2399 chips and another one that I can't read clearly Thoughts?

I see! Thanks.... But those are more like boost pedals... My idea was more like on some of the Lichlaerm audio pedals they have a so called " propetary cur control". Like on the Ritual ( rat based circuit ) to mention one Is apparently a LPF or hi cut i guess

hey sorry for my uneducated question.... but what filter will work best to dial, while having low tuned guitar or bass , in order to get more low end or tighten a bit my sound? in my understanding, i need a HPF......... in another words, im after a control that will allow my distorted sound...

Does someone here have the schematic for the Cleric fuzz?

Oh wow!! Thanks!! A drawing with we way better for my low skills, of course when possible

Just to make sure i understood correctly By that: (You are essentially going to wire the pots in parallel, leg 1 to 1, 2 to 2...) You mean: wiring in parallel, the Time and Repeats pots together right?

Thanks for the help I have all the stuff mentioned.. hakko soldering iron,flux,solderwick, DMM and even a cheap smd hot air rework station.... I have build quite a number of analog pedals, but this digital world is quite new for me... And my friend just gave me this pedal for that mod in the...

Hope this fotos help for the Interesting mod you suggest

Thanks a lot. I can give it a try tomorrow... Could you maybe help me out with a little drawing/ diagram to understand a bit better what i should do? ( Not so much experience yet)

hello people! a friend of mine just gave me today his Prophet delay... and told me about doing a mod that saw on the video linked here (4m :41seg) wich is apparently the "Glitch Mod" i gues sort of feedbacking one of the modes on the toggle switch..... when moded just the 3/8 section will...

Thanks a lot for the effort.. somehow i saw some infos for that mod, on the doc from Griffin Buzzking V1, i just couldn't understand exactly how that goes on the 3pdt That 2 knob job looks very interesting as well.. thanks a lot for the enlightenment and your help

Octave on/off on a foot switch and the spdt for the -1/-2 mod..... Would that be possible?

😍 Amazing!!! Thanks a lot for the quick response! I may give it a try tomorrow.. seems pretty straightforward mod I was thinking if it could be possible to separate the octave section and put it on a 2nd foot switch? If possible.. how could i possibly implement this another mod? Thanks a lot...

im building up this pcb from Griffin FX Buzz king..... and i saw that the octave secion is a MXR blue box...... i have seen many mods for the Blue Box, but the one that interest me the most is the 1/2 Octave switch for the CD4013 chip..... im not so experienced with mods, etc... here below...

Oh snap!! I forgot it. Sorry All pots are 100k B All caps on board are 100nf Resistor on board 100k Diodes are 4148 For the tone control on both pots C11,C8- 150nf C12,C9- 22nf C10,C7- 470pf R4,R6-220k R3,R5-51k