Search results

All of these were made using cricut. For some I designed the film free decal and used the print and cut feature to make sure it was perfectly sized. Others it's a straight vinyl application, and a couple of them are stencils I cut out with the cricut and used to spray paint the graphics. Cricut...

Awesome work and thanks for the response. One last question. I see Laserpecker 2 and Laserpecker 2 pro. Do I need to get the pro or is the basic 2 ok?

Interesting. Do you have to do the pedal in 2 parts? For a 1590bb pedal, it seems like the 4x4 inch engraving wouldn't be great. But I love the compact design. What make it easier than others. Do they not all generally use Lightburn or lsrgrbl?

Hi all. I'm currently using either a vinyl cutter to cut stencils and spraying graphics, or no film waterslide for graphics. I like the idea of the precision a laser engraver gives me. I'm looking at the Atomstack p9 M50 engraver. Its a 10w output and small footprint. So suits what I want to...

Awesome. Thank you. I'll socket it and try both (and also order the 5532 so I can change when I get it too).

I'm currently building the Grover Drive and realized I do not have the NE5532P chip. I have the following on hand. Would any of these work (I'm assuming the first one, but want to make sure) NE5534 OP07CP TL071 TL072 LM358 NJM4558 Thanks all

So I figured out what happened. I was victim to my own stupidity. I had my in cable plugged into my out and vice versa, so once I corrected my stupidity, it's working just fine!!! :ROFLMAO::ROFLMAO:

Here's my very very VERY dumb mistake of the week. I built 3 pedals this week. Before I box a pedal up, I always test them on the micro-proto board. It's been a life saver. I built a Blue Breaker, a Cracklejack and the Zapper. All 3 got no sound. I also have an audio probe, so I took them off...

So, I did this with an A10k. Going to test soon. Thanks for the advice

I do, I have a bunch of A10ks

I'm building the Park and Ride, and realized I don't have a C10k pot. I do have some C100k pots. If I run a 10k resistor across lugs 1-3, that should theoretically get me to 10k. Is this a workable solution? Thanks all

Hi all, Just finished up a couple more builds. I had an issue with my film free waterslide on the Cujo fuzz. I'm starting to get very annoyed with the graphics. I think I may invest in a small laser engraver to apply text labels. The Cujo Fuzz. This is the second time I've built this. The...

Dunlop delrin .71 . Took me a long time to settle on one. I tried nature, small, thick, thin etc. I love these picks. I play mostly blues, rock and acoustic. I'm intermediate at best so shredding is not in my forte. This allows me to do pretty much everything I need.

I tested all 3 transistors. All are reading 62-63 hfe. I did not breadboard as I was building onto the PedalPCB PCB. I generally only breadboard if I'm building onto a stripboard.

So Muffin Fuzz is by far my favorite PCB, in particular the Green Russian variant. I have built and sold this a few times. I actually had someone who has the old massive Green Russian buy my version because he wanted something that took up less space on his board. He sent me a side by side demo...

All 3 have HFE of 62-63. I did put them into my tester to get the C/B/E oriented right

Hi all, Just finished building the Tone Vendor MKI. Getting sound in bypass, but nothing when engaged. I have an audio signal tracer, and tracing the circuit, I'm getting sound on input, at C1 and on the base pin on Q1 (using AC128 for all 3 transistors). The sound dies on C2, which is listed...

Thanks for this. I just went back to my tester docs, and the limit starts at 25, which explains why it was saying unknown value or damaged part. Just put the pedal on the protoboard and it works great. Thank you

Hi all, Looks like I got a bad batch of capacitors. Just ran 10 through my tester and all reported damaged part. I tested with other capacitors in between so I know the reader is good. The closest I have is a 25pf. I've never used or built anything with an FV1 chip before. From the schematic...

I've built the Cujo fuzz before and really like it, but I was wondering is there any way to have potentiometers replace the treble boost and fat switch so you're left with an almost eq on the pedal with the mids pot already there. I hope I'm making sense. Cheers all.