Search results

Yeah ok i see. Now another thing... I see the polarity switch after the transformer on the schematic, it's connected directly to the output socket. I tried something quick here, i have a pedal that can accept mono in and stereo outs. I soldered 2 TS sockets together with inverted tip and sleeve...

i see, so when we lift ground on out B of an ABY pedal, signal goes out the ABY pedal into the amp B input and that amp B gets it's ground through the power cord ? What if i make a ABY pedal where there is a transformer and ground lift switch on out A, then out B is identical: also has...

Ah thanks, actualy i did not know the ground loop term meant that 2 different grounds were not at the exact same voltage and creating a current between them = ground loop noise. So that's good to know but... I'm still confused how the isolated ground of out B can work, like where does out B and...

I'm not sure to understand how that works. I did not build it yet. As i understands it, the ground at the output gets isolated from the input ground but... if out A has no isolated ground, and the fact that it needs something connected to it, thus making a ground connection to the pedal... Does...

mod if you see this post you can delete it

May i ask what are you using to hold the board in place?

I will try it. Thanks for posting the schematic. Is it all good no errors in the schematic? What makes the output B working only if out A has something connected to it? Is it "fixable" Thanks a lot :)

This one? https://shop.pedalparts.co.uk/product/ogpcb

maybe its not in the signal path?

Yeah, but would be nice to make a remark on the build guide about it or something, i realised pretty quick that this company is a bif of snake oil oriented, with the enclosure vintage style i thought of neve, anyway, as you say its just a buffer, i'll pass on this one i think.

One side of the board is just for power and its as big or more than the actual circuit lol https://reverb.com/ca/item/29778108-29-pedals-euna

About that Skeptical buffer... On 29 pedals website it says no electrolytics in the signal path but there's a lot on the pedalpcb board image i see on the website. What is going on here? They can't be all for the power delivery?... https://www.pedalpcb.com/product/pcb568/...

Dunwich Amplification Fuzz Throne pcb for diy? Did PedalPCB made one? If not i'll build this: https://dirtboxlayouts.blogspot.com/2021/03/dunwich-fuzz-throne.html But i thought i'd ask first, sometimes i just dont find them on the site. Thanks

Just finished mine. I combined Beavis design with the LDR idea of the other layout and added pots for send and return levels. Toggle switch removes the LDR from the path. Swapped the toggle that activates the feedback for a 3pdt stomp with a led. No pictures of the inside because it's a complete...

Ok i think i understand but when people say some hfe value, is it usualy when at 1mA ? I was looking at this datasheet for 2N2907 and it seems there is many measurements of hfe... https://www.taydaelectronics.com/datasheets/A-115.pdf

May i ask which ldr and led is best to use with this ?

May i ask what's the best LDR and LED to use with theses?

I emailed banzai about it, they can't get them anymore. Yeah so i look at the datasheet of 2n270 and try to find one very close to it? What are the most important spec detail to match? I'm not so much used to find alternatives for transistors, especialy the very old ones.

I'm now done with bom carts for 8 pedals, just this one i can't find and not sure which substitute would work best. 2N270 source or substitute for Mister Fuzz please? 2N527 would be ok? others? I'm surprised there is no thread about this substitute for mister fuzz on this forum Thank you!

Hello, i'm starting to buy parts for this mini special edition, i was wondering if the BOM is the exact same as the kliche mini?