Search results

Hi all, Schematic is over here: Link I wanted to try this out for quite some time. But I wanted to build it without the 8V regulator. Going from 9V to 8V seems a bit meh. The problem is, in my opinion, that the TLC2272 opamp is max rated for -8V to +8V, so in that sense the regulator makes...

Hi all, I've seen quite a few build reports on the Median, which makes me want to get one myself. Musikding has them in store, so I'm going to order one soon. I'm wondering if the original really had a trim pot or if it had a resistor instead. So, more of a question for Robert. If there was a...

Hi all, Last weekend I boxed up my Pharmacist clone and I was looking for voltages on this forum, but didn't find any. So I'll attach mine here. Taken with all knobs and Bass and Treble trim pots at 12 o'clock, Boost gain trimpot fully CW. If anybody can confirm that would be cool! Kind...

Hi all, I was bored so I started building a pedal that I already sort of have :). Well, I have the Thermionic Deluxe. And now I built the normal Thermionic on Vero, using a layout from Alex over at tagboardeffects. Why? Well, bored. And I thought it'd be interesting to see if with Vero I get...

Hi all! I put the Galileo on a breadboard to see if I like it (turns out I really do). So I compared the different schematics on the interwebs, the ones I've found anyway. I think it was traced first on FSB by juansolo: Link Then there's the PPCB Bohemia schematic: PDF And the Aionfx Gaia Mk...

Hi all! Just finished my FV-1 devel board. Plugged it in, worked fine right off the bat. Dumping and writing EEPROMs works, no problem. Thank you Robert for the PCB and everything and the quick delivery!!! Kind regards, Seb

Hi all, I got a Unison PCB from Robert with a pre-soldered FV-1. I had read that it's the greatest pedal from PedalPCB :cool: Not sure that's a fair statement, because that'd be comparing apples to oranges. Anyway, I had to try it. I really like the "Dual Detune" setting (switch upward), it's...

Hi all! I finished a Thermionic Deluxe a few days ago and I have one doubt. Build Doc When I'm in the "low gain" channel (channel LED off) and strum some chord, not only the LEDs L3B and L4B light up, but to a lesser extend also L3A and L4A. Is this normal?

Hi all! I'm gonna get started on the Boogie Monster soon, tomorrow I suppose. I have a cheap transistor tester that shows Vg(off) and Idss and about 20 J201s (SMDs on adapters). So far I measured 10 and they have Idss from 1.1 to 1.4mA and Vg from 553 to 799mV. I read a post somewhere here on...

Hi all, I'm building the PedalPCB Closed Circuit at the moment. I was about to solder the caps when I realized that I'm apparently one 100nF (=0.1uF) short. The Musikding kit contains four 100nF caps. It looks to me like a fifth 100nf was not sent because the BOM contained in the PedalPCB build...

Hi all! Beginner here. I have a Thumbsucker kit to build and to make my life easier I want to mark the stock settings of the Engineer's Thumb on the Threshold, Release and Attack pots on the decal (with a red dot or line in the 1 to 10 scales surrounding these three knobs). With "stock...