Search results

Im building the aion amethyst (boss dm2) the build doc is specifying these caps. 100pF c0g 330pF c0g 100n x7r 200n x7r i have most of these values from in mlcc but im not sure if theyre x7r or c0g. Some came from tayda and some are from other suppliers. How important in the circuit are these...

Having some issues with a mantle fuzz build. I notice the build doc is missing the refdes layout (not sure if refdes is the correct name) Normally the first page of the build doc shows what and where a part number it is, its currently showing the component value. Would make troubleshooting a...

Having some issues with my hakko fx888. Seems I may have left it on for a few hours without tining the tip. Did I burn out the heating element? I've got a new tip on the way l. Hopefully it's just due for replacement. I've had this tip for 4+ yrs.. it's done LOTS of work in that time Cheera

I see some people have used marbles with leds to good effect. Just wondering if there are other methods?

Does someone have the builds docs for this build? I ordered the board last year but i forgot to ask to get the build docs emailed (i dont have facebook) Very sad news. Thanks for making this section.

Im building the Aion Elysium, it uses a SN74HU04. I can only find a 74HC04 locally. Will it work? data sheet for the 74HC04 https://www.jaycar.com.au/medias/sys_master/images/images/9964720095262/ZC4804-dataSheetMain.pdf data sheet for SN74HU04...

Ive been learning come country riffs, fitting since i own two teles. Comp seems to be the secret sauce to get the most twang for you buck. However i know next to nothing about getting country tones. So, what comp will be best? Will be playing into a Blackface Princeton clone. TIA!

Just finished up the GGG PT-80 delay, id like to add a footswtich that will send the pedal in to runaway feedback/oscillation. I was hoping i could just jumper the feedback pot with a resistor (pic below). I've done previously with the seabed delay but that method doesnt seem to be working with...

Would removing this part of the pcb cause any issues? Im having some isses getting the jack installed Thanks

I just fininished up building a a spatialist and a deflector. Im getting an audio when the pedals are engaged but there is no effect on the audio signal, on both pedals. Before i start troubleshooting, i just want to check if the emproms/ic would get damaged if they were put in the wrong...

Boxed my sproing deluxe but installed the tremolo led backwards. While removing the led I lifted the cathode pad. Now my tremolo section isn't working. I rotated the led and ran a jumper to the footswitch and to r27 Unfortunately it's still not working. Does the led cathode connect to anywhere...

Having issues with my ceteus build. I forgot to put a dust cover on the treble pot (B250k) and think i may have shorted something. All i get is a synth type sound (sample below). Ive replaced d1,d2 and c104 and have also replaced all ic's. Those diodes were directly under the uncovered pot I...

Sorry if this has been asked and answered (i have looked on the forum) but have the drill templates for the Victory pedals been posted? Im looking for the Bobby, Cetus and Doxie. Cheers!

Would either of these ldr's be ok to use for the sproing deluxe? https://www.taydaelectronics.com/photo-conductive-cell-resistor-ldr-540nm-radial.html or this https://www.pedalpcb.com/datasheet/GL55_DATASHEET.pdf or should i wait until these turn up (currently in transit)...

Just finished a hydra build. Everything works as expected, just the repeats are very dark, is this normal? I wasnt expecting digital type repeats but its darker than any of my analog delays. I actually love the sound of it currently, but just checking if i messed up somewhere. Cheers!

Im having an issue with low volume on this build. Delay and modulation work, however the repeats are not as pronounced my first magnetron. All knobs seems to effect the signal as they should as does the internal trimmer. Ive reflowed all connections, i also replaced the internal trimmer. And...

I'd like to add the switch from the tagboard layout? Im terrible at reading vero builds. Am i correct thinking the switch is wired to tone 3 and the collector of Q3? Thanks!

I'd like to have the repeats distorted on the Seabed delay (deep blue delay). I've been told using a pair of anti-parrallel diodes from the repeats pot wiper to ground will distort the signal. Are there any other mods I could try? Cheers

Is there an older version of the build doc? The current one isn't lining up with my pcb. Is it possible to get a copy of the build doc that matches my pcb? Im having issues with my build and while i wait for replacement parts im going through and checking parts placement. Ive noticed some...

Just boxed. Im getting audio when engaged (also when bypassed) but no noticeable effect. Mix and level knob pots are working, the other pots dont really effect the audio. Any tips on where to go from here? I can post voltages if needed. Thanks in advance!